Recommendation needed for new O-ring for Disa Valve and cleaning MAF to check for extra air

[SaltyNC]

Salty:

GAS said the oring does come with grease, so I've put the order in now. Thanks for the responses and I'll let you guys know how this project went(ETA 2-4 weeks) as soon as all the supplies arrive to diagnosis and test the lean error code.

Cool. That's nice they include that. Hopefully your old seal comes off easier than mine did.

http://www.zhpmafia.com/forums/showt...589#post551589

Salty



Salty

[thinkpad240]

Yesterday, I cleaned the MAF with the CRC cleaner, replaced the Oring on the DISA valve(very easy to pry off the old oring), and also inspected and cleaned the boot hoses behind the MAF for any leaks. I saw no visible leaks. The only other places I did not visual check are the hoses going into the oil pan, areas under the engine cover. It was a limited inspection as I did not know where to look for all the possible leakage spots. I reseted the ODBC computer so I will check the codes again in about 3 weeks if the lean codes come back.

Old car with always something(small) to fix on my own, but very worth it.