Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Dec 2017
    Location
    Lake Wylie, NC
    Posts
    333

    Tie Rods Standard E46 3-series on ZHPs?

    I think I know the answer on this one, but I thought I better ask. Are the tie rods on our ZHP's the standard E46 3-series tie rods? Nothing special about ZHP tie rods, correct?

    Thanks!

    Salty
    __________________________________________________ _____
    2005 BMW 330Ci ZHP Jet Black/Black with aluminum cube
    Bone stock at the moment

  2. #2
    Join Date
    Feb 2014
    Location
    Kitchener, ON
    Posts
    6,050
    i'm pretty sure they're all the same.

    just get lemförder.
    peter

    2004 330i ZHP
    2005 330iT ZHP
    2010 328iT M Sport

  3. #3
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,131
    Yep, no alternate part number listed for vehicles with performance package/opyion no. xxx

    http://www.realoem.com/bmw/enUS/show...diagId=32_0940

    I think either Spenser @704sw or Nick @nsk040 has a set of good, used tie rods that they replaced while chasing an unrelated issue. They're both Charlotte peeps.

  4. #4
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Quote Originally Posted by ZHPizza View Post
    Yep, no alternate part number listed for vehicles with performance package/opyion no. xxx

    http://www.realoem.com/bmw/enUS/show...diagId=32_0940

    I think either Spenser @704sw or Nick @nsk040 has a set of good, used tie rods that they replaced while chasing an unrelated issue. They're both Charlotte peeps.
    Mine were toast. Floppy ball joint on one, and irritating reddish Canadian artifacts on both. I told GMP to pitch’em.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  5. #5
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,131
    Quote Originally Posted by 704sw View Post
    Mine were toast. Floppy ball joint on one, and irritating reddish Canadian artifacts on both. I told GMP to pitch’em.
    Ok I think Nick still has the good set then.

    @SaltyNC let me know if you want me to check with him on the tie rods. He's not real active on the forum so he probably won't see this.

  6. #6
    Join Date
    Feb 2014
    Location
    Kitchener, ON
    Posts
    6,050
    i think i have a good set of used ones, too. about a year old.
    peter

    2004 330i ZHP
    2005 330iT ZHP
    2010 328iT M Sport

  7. #7
    Join Date
    Dec 2017
    Location
    Lake Wylie, NC
    Posts
    333
    I really appreciate the offer, but now I have to ask why do do many have nearly new tie rods? Are you swapping in a tie rod from another car like an M3 or Z4? If that's the preferred path, I'll probably do that as well.

    Salty
    __________________________________________________ _____
    2005 BMW 330Ci ZHP Jet Black/Black with aluminum cube
    Bone stock at the moment

  8. #8
    Join Date
    Dec 2017
    Location
    Lake Wylie, NC
    Posts
    333
    Quote Originally Posted by ZHPizza View Post
    @SaltyNC let me know if you want me to check with him on the tie rods. He's not real active on the forum so he probably won't see this.
    Thank you for the offer. I'll let you know soon, but probably will upgrade the tie rods if that is what you guys are doing.

    Salty
    __________________________________________________ _____
    2005 BMW 330Ci ZHP Jet Black/Black with aluminum cube
    Bone stock at the moment

  9. #9
    Join Date
    Dec 2017
    Location
    Lake Wylie, NC
    Posts
    333
    Quote Originally Posted by slater View Post
    i think i have a good set of used ones, too. about a year old.
    Thanks, Peter. I'll let you know soon. Very much appreciate the offer.

    Salty
    __________________________________________________ _____
    2005 BMW 330Ci ZHP Jet Black/Black with aluminum cube
    Bone stock at the moment

  10. #10
    Autozone.com
    Don't forget to replace the INNER tie rod, not just the outer.

    Check out my youtube channel for all kinds of E46 DIY's
    http://www.youtube.com/user/flipfinish?feature=mhee
    Check out my BMW Blog
    http://smolckbmw.blogspot.com/
    Follow me on twitter @smolck

Page 1 of 2 12 LastLast

Similar Threads

  1. FS (SOLD): 2 Tie Rods - 8k miles - $125
    By Tnhl1989 in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 8
    Last Post: 10-09-2014, 03:30 AM
  2. Putting tie rods on
    By bshovers in forum Suspension
    Replies: 7
    Last Post: 05-05-2014, 06:25 PM
  3. Replies: 3
    Last Post: 10-03-2013, 03:46 AM
  4. Do ZHPs use standard e46 control arms?
    By Dave1027 in forum Suspension
    Replies: 43
    Last Post: 04-10-2013, 01:59 PM
  5. ZHP Tie Rods doityourself
    By Ricky Reevey in forum DIY
    Replies: 24
    Last Post: 08-30-2012, 03:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •