Results 1 to 10 of 10

Thread: ZHP Mafia Family Tool Pool - Tools for loaning

  1. #1
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,868

    ZHP Mafia Family Tool Pool - Tools for loaning

    I will start.

    SRS AIRBAG RESET TOOL

    I have the SRS airbag tool. My requirement is that you send me $10.00 in an evelope. That is it. Obviously, treating the tool as your own would be nice. Then a prompt ship back would be great. That's all I require.

    Can't see you guys spending $>250.00 for a one time tool though.

    This will include the reset tool and OBDII cable

    FRONT WHEEL BEARINGS
    I have all tools to perform this, but shipping may not be feasible.....so...if you're somewhat local and want to borrow......lemme know.

    This will include large sockets, breaker bar, and torques wrench for removal and install of wheel bearing nut.

    VANOS RATTLE
    I have the soft jaw vice liners. These are $20......not a huge deal.....and a $5 bill in an envelope for shipping will send these your way.

    PAINT CORRECTION
    I have a Porter Cable Orbital that I would be willing to loan. You will have to buy the pads and wax/sealant/correction items.

    I will update as I remember more.
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  2. #2
    Join Date
    Jan 1970
    Location
    Jersey Shore
    Posts
    384
    I have nothing to offer , but I do need to borrow a 3 prong puller for a FCAB job if anyone has one.
    I thought I had one, but I evidently don't.

    03 TiAg 330i ZHP
    -Alex

  3. #3
    Autozone has free rental tools, all you have to do is put a credit card deposit and they refund it when you return the tool, sometimes the tool is cheaper to just keep and may even have a nice case with it as well, trust me on this. I do believe they have the puller you need. They though do not have specialized bmw tools that dane has, or the buffer for lending.

  4. #4
    Join Date
    Jan 1970
    Location
    Ocean County, NJ
    Posts
    7,277
    Quote Originally Posted by adb1028 View Post
    I have nothing to offer , but I do need to borrow a 3 prong puller for a FCAB job if anyone has one.
    I thought I had one, but I evidently don't.
    Got a set if you need it. Let me know.

    Droid X. Tapatalk. Use it.
    -Be yourself; everyone else is already taken.
    ZHP Pre-Ride Briefing

    2005 ZHP, Alcantara, Silver Cube, Nav, Sharked, BMW Perf Intake, BMW Perf CF Strut Brace, CF Valve/Fuel Rail Covers, Shadowline Grills, CF Splitters, Fog Light Inserts, LED Interiors/Plate Lights, Euro-mirrors, CDV Delete, Beisan vanos, GAS DISA, BP Coded

    2017 Alfa Romeo Giulia Q4; Sport Package, CW Package, Nav, Sunroof

  5. #5
    Join Date
    Dec 2010
    Location
    Hanover, PA
    Posts
    2,027
    BRAKES

    Motive Powerbleeder & Craftsman Vacuum Bleeder sets

    OBDII CODE READER

    Actron AutoScanner Plus OBD II Scan Tool from Advance Auto

    OTHER

    I don't really have any "special" BMW tools except for an e30 O2 sensor wrench. Anything I do have is available for anyone in the area to stop by and use along with a space in my garage. This stuff includes:

    Select metric - regular well, deep well, impact sockets; combination wrenches - includes a autoparts store brand 36mm (?) socket for the oil filter housing

    0-150 lb torque wrench

    18" breaker bar w/18" steel 'extension' - useful for breaking lug nuts loose that shops throw on there with impact wrenches

    (1) 3-ton floor jack, (1) 3-ton bottle jack, (2) 3-ton jack stands, (2) 3 1/2-ton jack stands

    ATV/motorcycle jack (useful for trans & diff jobs)

    Other misc tools
    Last edited by billschusteriv; 06-28-2011 at 12:25 PM.

    Hankook Ventus V4's 205/55/16 | 16" BMW OE Style 45's | ECSTuning 15mm Spacers | Thule 45050 Crossroad Rack | Thule 870XT Fairing | LLumar 35%/20% Tint
    Custom Vienna Austria Euro Plate | GoMiniGo "No-Holes" License Plate Bracket | Smoked License Plate Cover | Black License Plate Frame | Khoalty LED License Plate Lights


  6. #6
    Join Date
    Jan 1970
    Location
    Huntsville, AL
    Posts
    3,981
    Does anyone have a rtab Tool (Rear Trailing Arm Bushing) that I could borrow?

    Dinan; Hign Flow Intake System, & Strut Tower Brace
    Turner Motorsports; Underdrive Power Pulleys
    Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
    Stewart High Performance Water Pump
    Hawk High Performance Street 5.0 Brake Pads
    Brembo Rotor

    The purposeful face of a formidable athlete:

    The spine-tingling 330i Performance Package.

    Purchased CPO on 12/23/2006 with 28,090 miles

  7. #7
    Is there a differential bushing removal tool for rent that's not listed? I'm doing tons of work and I'll be needing to use that specific tool to make things go much smoothly. Thanks guys

    Sent from my SM-G950U using Tapatalk

  8. #8
    Join Date
    Oct 2016
    Location
    Vermont
    Posts
    486
    Lending tools to strangers hundreds or thousands of miles away = worst idea ever

    Sorry--had to be said. : )
    2004 BMW 330i ZHP (50k miles), Jet Black with black leather, MFactory LSD (3.38) with Z4 cover, 18"x8.5" ET38 APEX Arc-8's (Anthracite) with 245/40 Michelin PSS', Koni Sports with factory springs and front and rear reinforcement plates, Shark Injector, Corsa TSE3 cat-back exhaust, TMS under-driven pulleys (water & steering), CDV delete, TMS CF strut brace, K&W CAI, GAS DISA rebuild, TMS pedals, Wheelskins steering wheel cover, roller tray center console, and WeatherTech floor and cargo mats

  9. #9
    Quote Originally Posted by Reasoned1 View Post
    Lending tools to strangers hundreds or thousands of miles away = worst idea ever

    Sorry--had to be said. : )
    I'm was thinking the same thing

    Nothing to worry about here, I don't want to buy a tool I'll only use once if I'm lucky. But I totally understand if it doesn't happen here.

    Sent from my SM-G950U using Tapatalk

  10. #10
    Join Date
    Jan 1970
    Location
    Southern California
    Posts
    16,769
    Autozone.com
    No major issues so far over several years.

    Sent from my SM-G955U using Tapatalk
    Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
    "ZHP or not, I still like you"


    ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV
    ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, Ground Control Coilovers, UCC Sway Bars, Apex EC-7 18x8.5 ET38
    Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
    BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
    Note: Actual car no longer resembles signature picture

Similar Threads

  1. Mafia Family Rules
    By kayger12 in forum New Members (or older members who have not introduced themselves)
    Replies: 83
    Last Post: 04-28-2016, 01:23 PM
  2. SRS Peake Reset tool for loaning.
    By danewilson77 in forum Mechanical | Troubleshooting
    Replies: 112
    Last Post: 10-04-2015, 01:48 PM
  3. Replies: 1508
    Last Post: 06-12-2011, 05:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •