I always thought this light...



.... would clear after performing a brake job, to include replacing wear sensors (if necessary), after a certain amount of driven miles.

Wear sensors are located on front left, and rear right corners (review)

I performed my brake job about 100 miles ago, and the light hadn't cleared. I dud some research and found the below procedure worked immediately for me, clearing the light.

1. Place the ignition in position 2, car NOT running.
2. Press the "I/O" button on cruise control and hold in for 10 seconds.
3. Release "I/O" button, and press and hold "+" button for 5 seconds, then release.
4. Press accelerator in and hold, and you should see the light clear. Release accelerator.

Many may know this already, but I thought I'd post in case some do not.

Sent from my SM-G955U using Tapatalk