E9x Keyless Entry/start (PassiveGo) Retrofit for E46 (yes, really)

[YoitsTmac]

Haven't yet run into an issue with brake cooling, so I haven't done anything with brake ducting yet. I think my brakes do a decent job dissipating the heat on their own (track pads, slotted rotors, high temp brake fluid). Maybe if I had more power I'd have more of a problem, but because the car is so slow, there isn't a whole lot of speed to scrub off.

I'm not too keen on cutting; do you have any links for this particular setup or is this something you devised?

You’d have to do cutting of some sort regardless to get air to the hub and air from the front. It is something I designed. DIY coming after finals

[YoitsTmac]

Bump! Lots of interest but no takers

[usinjin]

This is something I'd probably take. Not this second, as I'm shelling out $4k for repairs, but sometime a little later this year, I probably would.

[YoitsTmac]

bump!

so much interest but no takers

[YoitsTmac]

BUMP.

New time in life, lets try this again. Always gets tons of interest, lets see if someone is ready to do this mod.

[YoitsTmac]

bump bump bump