Just to make sure if it was a MAF it should throw a different code other than lean banks 1 and 2 right?
Just to make sure if it was a MAF it should throw a different code other than lean banks 1 and 2 right?
05 ZHP 6MT Sedan Titanium Silver
Machine
05 ZHP 6MT Sedan Titanium Silver
Alright. Just took all the hoses off the intake side of the motor. All hoses are good and disa seal is really tight. Also dipstick o rings are about 1 1/2 years old.
Any ideas?
https://youtu.be/TOgfr82Ths0
05 ZHP 6MT Sedan Titanium Silver
Tonight I got
P0300
P0302
P0304
P1000
05 ZHP 6MT Sedan Titanium Silver
How many miles on your ZHP? No oil in the coolant? I would start with a compression and leakdown test and a smoke test. I'd bet your CCV is toast and causing the lean codes as well as any other un-metered air post-MAF sensor. How old is your fuel pump and filter?
240k miles. Don't know how if the fuel pump has been replaced. Probably 20k on filter. No water in oil or vice versa.
05 ZHP 6MT Sedan Titanium Silver
CCV was toast. Changed it and road tripped it from LA to SF and back and its still good, just in case anyone is having the same issue.
05 ZHP 6MT Sedan Titanium Silver