"Group Buy" Morimoto XB LED Fog Lights!

[WOLFN8TR]

Now that looks cool and cold!

[d-rod]

I take it the group buy price is over?


Sent from my iPhone using Tapatalk

[WOLFN8TR]

I take it the group buy price is over?

Unfortunately Yes it is.

Got mine in last night and followed BP's advice on adjusting them by hand.

Lesson learned the adjustment screw is useless. Just loosen everything and move the assembly by hand.

They're in the dirt lol

Wow those are low! Ok I will have to readjust mine tomorrow.

[Dual]

As received, and as-adjusted [not my garage]-

[WOLFN8TR]

Did you push the finned section of plastic by hand? It swivels pretty well that way and adjusts beyond what the screw allows. You don't actually need to do anything with the center screw other than loosen it.

Got mine in last night and followed BP's advice on adjusting them by hand.
Lesson learned the adjustment screw is useless. Just loosen everything and move the assembly by hand.

I readjusted mine, the adjuster screw is definitely useless. I removed it completely, adjusted the fogs to the proper level and reinstalled the screw. From the factory adjusted all the way down they were at the same height as the headlights.

[WOLFN8TR]

For those of you that missed out on the GB pricing now is your chance to get them for the same price!

You do not need the splitters or resistors. Plug N Play.

https://www.lightwerkz.net/index.php...s-e46-e39.html

[BMWCurves]

Y'all stop making spend money, seriously!

That said...

How do people like them so far?

[az3579]

Y'all stop making spend money, seriously!

That said...

How do people like them so far?

Love it, so far!
I like the trim that comes on them, because this way it's less obvious that I'm missing a fog light trim on the passenger side. LOL

[CoastalJay]

Need to adjust mine back up and level soon. Pushed them all the way down and I can see the fog cut-off hit the ground 3ft in front of the bumper. Should have left them as is from factory and then adjusted.


Sent from my iPad using Tapatalk

[ZHPizza]

Adjusting these things freaking sucks. That's for sure. Not that it's inherently difficult to push them around, but you have to remove them from the car to do it. I got to where I was just holding it in place over the screw hole with my hand and checking and adjusting and repeating with the other side blocked off. Finally got them squared away.

Here's some fricken pics frick

Adjusted them before I left work - 25ft out, levelish ground

Fog + parking + drl's


Low beam only


Fog + low beam - notice how it fills out the sides and foreground


Backed up to 50ft and dropped the rear down a slope to point the car up

Fog + parking + DRL


Low beam only


Fog + low beam


Back at home and adjusted the fogs up some about 30ft out

Fog + parking + DRL


Low beam only


Fog + low beam


Hi beanz!