So I've been on this forum for over a year without a project thread so I figured I'll start now!
My name is JP and I drive a 2004 TiAg ZHP Slicktop with steptronic, Black leather/Black Cube and Cold Weather Package
Up to date maintenance log:
55304 - Oil filter, spark plugs, thrust bushings, left rear wheel bearings, rear tires, water pump
60005 - Oil change, air filter, microfilter
65010 - Oil change, oil filter housing gasket, valve cover gasket
70105 - Oil change, air filter, microfilter
73210 - Expansion tank, tank thermostat
75020 - Oil change
78108 - Belt tensioner system with both belts
80100 - Oil change, oil pan gasket
84958 - Oil change
89997 - Oil change, front pads and rotors
92500 - Intake air boot
95020 - Oil change
100020 - Oil change
105100 - Oil change, microfilter
(10/15/2016) - 106100 - Oil change, microfilter
(10/27/2016) - 108000- Spark plugs, Control Arm bushings, Idler and tensioner pulleys
(11/5/2016) - Battery replacement
(1/21/2017) - 113805 - Control Arm bushings, Sway bar end links, Fuel filter,
(8/27/17) - 123xxx - AT fluid with new filter and gasket. Differential fluid flush. Air Intake filter
(12/10/17) - 128xxx - Front tie rods, M3 RTABs with limiters, Secondary air pump replaced with used unit, radiator with coolant flush. Upper and lower radiator pipes replaced. Alignment. Valve cover gasket replaced. Oil change
(12/30/17) - 129xxx - DISA rebuild with German Auto Solutions kit. 1.4 bar coolant cap
3/2018 - 132xxx DISA replaced with used unit. Complete CCV System refresh. Low pressure power steering hoses replaced + filter.
(9/16/18) - 134403 - front and rear brake rotors and pads with brake fluid flush. Replace steering column linkages, replace dip stick o-ring and lower intake boot. Oil and filter change with Rotella.
Current Mods:
OEM Performance grills (courtesy of PO!)
LED interior lights
OEM M3 strut bar
OEM M3 RTABs with limiters
OEM Z4M FCABs (Pending install)
GAS 1.4 coolant cap
A little backstory about myself, my first car was a 2004 Pheonix Red Mitsubishi Lancer OZ Rally Racing Edition. Its funny now but I LOVED that car back in HS, had the coolest car after the kid with the brand new STI. I did very little maintenance on it but I'll be damned if it wasn't the cleanest lancer you've ever seen! Never died on me though, my trusty Red Rocket.
Well that got me through college and a year of graduate school before going off to Medical School in the Caribbean. Perfect opportunity to sell off the Lancer and get something new when I return to the US. Well that time came and I wanted a classy, sophisticated yet sporty sedan. Spent about a month looking for the perfect car while studying for my first board exam before ultimately landing on the ZHP.
I bought the car on Oct 2016 with 107xxx miles from a BMW mechanic who included a box of misc parts and a basic maintenance record. He was selling it because he had just had purchased an X3 after having a newborn and he did't need another car. His original asking price was $9000 but my father, who was helping me with the purchase stated "I am not paying that much for an old BMW thats gonna break." I just knew this was a car I didn't want to give up (thank you mafia for that) so I was able to talk him down to $7500.
I have no pics on purchase day sadly but we picked it up at BMW South Atlanta where the PO had gotten a fresh oil change and replaced all the filters while he was work. I spent that entire first weekend decontaminating with clay and iron remover, then polished with my super cheap turtle wax polisher + meguiars ultimate compound that I had laying around, before topping with Collinite 845. Interior was treated with the Leather Masters kit from Detailers domain and Einzett cockpit premium.
After a couple of 12 hour days:
Drove down to FL to start my clinical rotations
Moved to Laurel, MD for a year to continue clinical rotations and met the guys at Rennwelt, thanks to the mafia again! Done quite a bit of work with them.
Here are the beautiful views out in Frederick, MD
A look inside during a VCG replacement and finally got my M3 strut bar put in! Really wish I had thought to do the Vanos rebuild while it was open.
Replaced my burnt bowls with the refurbished bowls from Clemsone46. Clear to see which was original and which was the replacement.
Light output: HUUUUUGE difference. Went ahead and put some Osram CBIs and enjoyed ridiculous light output
Reply With Quote
![http://s900.photobucket.com/user/othibau/media/Junesig.jpg.html][IMG]http://i900.photobucket.com/albums/ac208/othibau/Junesig.jpg](image.php?s=95a2990caf567a715839507e6d37b2c6&u=605&type=sigpic&dateline=1367713585)
Originally Posted by Oli77
