Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    2,832

    (acquired): spacers and hardware

    Looking for whatever size spacer is needed to run the stock Style 135s with the BMWP calipers.

    It looks like a 5-8mm spacer would work to be safe. I need 2 spacers plus the associated hardware shipped to 41051. Thanks in advance.
    2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover



  2. #2
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    You’ll need to achieve the equivalent of ~ET41 minimum, from my experience.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  3. #3
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,130
    Quote Originally Posted by 704sw View Post
    You’ll need to achieve the equivalent of ~ET41 minimum, from my experience.
    Did you fit yours with the 135's or did you have your CSL reps by then?

  4. #4
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Quote Originally Posted by ZHPizza View Post
    Did you fit yours with the 135's or did you have your CSL reps by then?
    I already had the CSLs, but I test fit my 135s out of curiosity. 5mm (8J ET42mm) didn’t clear but stacking my two 3mm spacers (to make an effective ET41) did clear.

    3mm on my 8.5J ET45 CSLs lightly scrape, but 5mm clears just fine.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  5. #5
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    2,832
    So I’ll need over 5 for sure, 8mm would probably suffice???
    2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover



  6. #6
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Quote Originally Posted by BADCLOWN View Post
    So I’ll need over 5 for sure, 8mm would probably suffice???
    Yep 8 will suffice, but 10 might be easier to find.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

  7. #7
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    2,832
    Delete this please, wanted to give it 12-18 hours on here and try to buy from a member that had them laying around. Ordered (4) 10mm spacers with hardware for 140 shipped
    2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover



  8. #8
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,130
    Quote Originally Posted by BADCLOWN View Post
    Delete this please, wanted to give it 12-18 hours on here and try to buy from a member that had them laying around. Ordered (4) 10mm spacers with hardware for 140 shipped
    Good call. 10mm is perfect for the 135's.

  9. #9
    Not wanting to thread jack... but you guys seem to know wheels a lot better than me (I know nothing), what is the optimum et if I buy some apex 17 inch wheels with a slight drop and everything else stock? @ZHPizza @704sw tia

  10. #10
    Join Date
    Dec 2016
    Location
    Greensboro, NC
    Posts
    3,650
    Shop Advance Auto Parts
    Quote Originally Posted by Johnmadd View Post
    Not wanting to thread jack... but you guys seem to know wheels a lot better than me (I know nothing), what is the optimum et if I buy some apex 17 inch wheels with a slight drop and everything else stock? @ZHPizza @704sw tia
    I’d go with the 17x8.5 ET40 (same as @san and I think @BMWcurves have). You can always snag some 3mm pretty inexpensively if you want to fine tune your fitment.
    Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual

    Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
    M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots

    Awaiting Install: M3 Wing Mirrors

Page 1 of 2 12 LastLast

Similar Threads

  1. Valentine one hardware question
    By MrAdventure in forum Audio | In Car Entertainment (ICE)
    Replies: 6
    Last Post: 03-06-2017, 12:15 PM
  2. What can i get away with as far as spacers
    By Dtownwolfpack in forum Wheels
    Replies: 4
    Last Post: 08-20-2014, 11:26 AM
  3. FT/FS: My 12.5-mm TMS Spacers for Your 15-mm Spacers OR $90 Shipped
    By Crickett in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 13
    Last Post: 03-31-2014, 09:35 PM
  4. H& R Spacers
    By JimN9NE in forum Wheels
    Replies: 2
    Last Post: 12-01-2012, 03:05 PM
  5. E46 wheel arch liner attachment hardware?
    By aurelius in forum Maintenance
    Replies: 4
    Last Post: 06-22-2012, 05:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •