I'm running pss10, Turner camber arms rod end, delrin subframe bushings, and solid everything else with a 3 clutch lsd.

Ive had some clunking and road noise which I've just attributed to the solid bushings. I had the LR wheel bearing replaced because there was some play. That hasn't changed the noise.

Lately the noise has increased on rough roads, heavy clunking. Then today I noticed that the RR is about 1/4" lower than LR. I pulled the wheels off. Ride height adjustments are at the same level. Camber arms, trailing arms, etc are all secure.

Thoughts on what's causing the ride height difference?

Edit: subframe reinforcements were installed w the bushings