Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 10 of 33

Threaded View

  1. #1

    Cylinder #6 Misfire, only at ~6krpm

    Starting this thread with things that I've already replaced:
    Spark Plugs
    Coil Packs
    Fuel Filter and hoses
    VANOS seals
    DISA O-ring

    Seems to mostly happen in 3rd gear at around 6000 rpm. It's pretty repeatable and irritating as the DME cuts the cylinder out completely. I'm thinking it is a position sensor because of the exact place in the rpm range as well as the only cylinder that it happens to.

    Edit: Also happens at part throttle at ~6k in third. I believe it is load independent. I'll have to be "that guy" and rev it in idle at see what happens.

    Anyone have tips for an issue like this?

    Freeze frame data from INPA:
    Last edited by DeathTrap; 11-28-2018 at 05:44 AM.
    -Corey

    2003 Blue ZHP Sedan @ 210k
    Dead due to damaged valve. Parts are being transferred to a wagon:

    2003 325iT Japanrot 6MT @ 230k

Similar Threads

  1. Help/Advice-misfire (long-ish)
    By Washburn in forum Mechanical | Troubleshooting
    Replies: 12
    Last Post: 03-29-2015, 08:02 AM
  2. P0302 cyl 2 misfire
    By Washburn in forum Mechanical | Troubleshooting
    Replies: 2
    Last Post: 03-07-2015, 04:55 PM
  3. Cyl 6 Misfire after repeated short run times
    By CarbonZHP in forum Mechanical | Troubleshooting
    Replies: 49
    Last Post: 10-22-2014, 11:32 AM
  4. Misfire cylinder 1 & 5
    By PirateZHP in forum Mechanical | Troubleshooting
    Replies: 24
    Last Post: 12-04-2013, 10:26 AM
  5. Misfire cylinder 1
    By Tampa330i in forum Mechanical | Troubleshooting
    Replies: 14
    Last Post: 04-02-2013, 09:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •