UUC black trans bushings fluid filled..
I couldn’t figure out what the goo was under my car in the garage. Got it up in the air and discovered the it was coming from the transmission bushings! Not only that but the bushings were completely shot.. compressed to half their original size. WTF?
I replaced them and now I have a bad vibration. Probably because I rebuilt the drive shaft and put it back in before I discovered the bad trans bushings. I think the drive train is out of alignment now. Not too happy about this.
Here’s a pic of the goo. The viscosity is like paste and it damn near impossible to get it off the concrete floor
Granted these bushings probably have about 80k on them but the OEM bushings didn’t do this. Replaced with M3 bushings.
Dinan CAI &Throttle body, ESS Tuning TS2, Bimmerbrakes gen3 headers, UUC SSK & DSSR. Achilles oil pump, VAC oil pan baffle
M3 Motor mounts, UUC Trans mounts, Modified clutch style LSD 3.15, TMS front subframe reinforcement, Koni Yellow sports,
H&R sport springs, UUC sway bars, BMW Perf. Rotors, UUC SS brake lines, Hawk HPS pads, CSL replica wheels,
Rotora strut bar, FXR HID conversion, M3 Mirror conversion, BSW stage 1 speakers