Results 1 to 4 of 4

Thread: RTAB install. Preload changes when lowering?

  1. #1
    Join Date
    Feb 2019
    Location
    W/S, NC
    Posts
    18

    RTAB install. Preload changes when lowering?

    Wondering what you guy's thoughts were on RTAB's. I'll be installing a fresh set of Z4M Lemforders with AKG limiters. I've done this before on my old E46.

    My question is does the amount of preload on the bushing change when the car is lowered? Would it make sense to wait until I lower the car to install the new RTAB's. I've heard people in the past float theories that when a vehicle is lowered it changes the required preload on the bushing.

    Personally I don't think it matters, as long as when I install them I keep the preload identical to what it is now.

    What do you all think? Thanks

  2. #2
    It matters since the relation of the body to the hub changes when lowering the car.

    How much it matters? Not sure on that one. Stock preload spec is 8mm above hub center. Maybe increase it a few more mm for a lowered car?

    Sent from my Pixel 2 XL using Tapatalk
    2003 Blue ZHP Sedan @ 195k
    Paint chips | Current MIL: P0420 | Airbag Light | Poorly Sprayed Black Style 135s |Ugly Alcantara Steering Wheel | Trunk Squeak | Faded Shadowline Trim
    This car is not a peach. It is a precision instrument, and will be used as such.

  3. #3
    Join Date
    Nov 2013
    Location
    Bay Area
    Posts
    2,808
    I donít know the answer, but I do know I did it wrong on two cars

    I did full suspension on my zhp and that was the only thing I did wrong. And then I did it wrong on my zsp


    2005 330 ZHP Imola Red - 1995 NA Miata
    2004 325 M56 Steel Blue Metallic - Sold
    Stephen's DD & AutoX/HPDE Build Thread
    Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
    DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap
    Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM


  4. #4
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,838
    The amount that it matters is negligible

    Sent from my Note 9 using Tapatalk
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

Similar Threads

  1. RTAB information/help
    By ClimRox in forum Suspension
    Replies: 7
    Last Post: 06-03-2016, 10:32 AM
  2. How does this rtab kit look?
    By Dave1027 in forum Suspension
    Replies: 22
    Last Post: 10-07-2014, 10:20 AM
  3. RTAB won't go in
    By alexandre in forum Mechanical | Troubleshooting
    Replies: 2
    Last Post: 12-19-2013, 05:49 PM
  4. Don't be scared of RTAB's
    By MooseX in forum Suspension
    Replies: 14
    Last Post: 06-09-2013, 11:54 AM
  5. Anyone have a MIS RTAB tool?
    By MooseX in forum Suspension
    Replies: 5
    Last Post: 05-28-2013, 05:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •