Anyone have one they use/recommend? Additionally, anyone heard of or used these before? I’m looking to get one for my ZHP for road trips
https://rover.ebay.com/rover/0/0/0?m...2F172692876320
Anyone have one they use/recommend? Additionally, anyone heard of or used these before? I’m looking to get one for my ZHP for road trips
https://rover.ebay.com/rover/0/0/0?m...2F172692876320
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
I'm not personally a fan. I would prefer to get a Clear bra put on. Lots of types out there and shop to do it. Xpel clear vinyl is probably the most popular right now.
Sent from my Pixel 2 XL using Tapatalk
I’m not looking for a permanent cover, just something to slap on for a road trip
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
Never used one but I've heard that they can do more damage than good, what with debris getting underneath and being ground into your paint
2004 BMW 330i TiAg ZHP/// 6MT(purchased from forum 6/06/16);
KONI Yellows | Akebono Brake Pads | ECIS cold air intake system;
Hotchkis Sport sway bar | ECS Tuning Carbon Fiber front strut brace
Vibrant Performance Muffler | Coby Wheel Tri-Stitch steering wheel & shift boot
Michelin PSS | Blizzak WS-80
They can hurt your paint if you don't put it on correctly (flaps in the wind, something gets under it)... but they do work. I recommend a good coat of wax before you put it on, and as you said, just use for road trips, don't keep it on all the time. Def take off if rained on. My issus is that the regular 330 one is not a fit for the zhp mtech2 bumper.
Sent from my SM-G955U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
I was kind of hoping the standard bumper cover (as linked above) would manage to fit our bumpers in some way. That sucks
Or even something like this:
MIDWEST CORVETTE Camaro NoviStretch Front Bra High Tech Stretch Mask Fits: All 5th Gen 2010 Through 2015 Camaros https://www.amazon.com/dp/B0169IHCHA..._m91iDbAZSPHQX
2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover
You could try 3M Paint Defender Spray Film: https://frontstreet.media/2018/07/13...m-really-work/
https://www.autogeek.net/3m-paint-de...pray-film.html
2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats
I have used something like that. I did the Road Warrior Plus one. It does work. However, it's a pain to take off without a pressure washer. Even with a pressure washer, there are some pieces left that you have to scratch off. I left an edge so that it would be easy to peel, still took forever. If I ever do it again, I'll painters tape it first, then coat it lol
The basic 330 one that fits the hood for sure and kinda some of the front, so you would get partial coverage. But, it doesn't cover the lower bumper part at all.
Sent from my SM-G955U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture