Hey guys, I wanted to just toss my problem around in here see if anyone has any knowledge or ideas that might help my situation. I finally got my tires mounted to some new Apex rims. They are 17x9 et30 running 255 square. They clear the front and everything is fine. While stationary or just regular cruising there is no rubbing in the rear, however whenever the rear shocks are under compression (braking, accelerating, or turning, the fenders do rub just a bit on the edge of the tires. Wondering if anyone else has had this problem before and knows any ideas besides fender rolling, which was done by the previous owner, or completely getting a new suspension(which i would like to avoid for now at least). I know he ran 18x9 et42 and had no problem with the same suspension set up. I will be contacting him and apex tomorrow to see if either can be of some help. Thanks guys.