RUS_ZHP,
Hit me up via PM to see how we can get this approved for and via the site. Great looking stuff. Hope we can make it work.
For others wishing to sell wares on ZHPMafia.com, please hit me up via PM, so we can work out the details and fully vett the plan prior to posting.
Thank you
DW
Sent from my Note 9 using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
This is awesome!
I'd like a jack pad, and a license plate frame. I will wait until the frame design is ready.
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Great! Definitely put me down for the M3 mirror base plates and the jack pad. Will probably get the license plate frame later as well.
Thank you all for the interest. I need to address few things, so I can be compliant with site rules and expectations, before money can be recieved and parts can be shipped. I will also update the original post with more details.
Sent from my SM-G960U using Tapatalk
Pretty nice stuff, man. What printer do you have and what design software do you use? I have an inexpensive Creality Ender3 that I have been learning the basics of printing with. I haven't found it in my budget or designing need to shell out the money for some of the high dollar 3D modeling software yet, but I am curious as to what you are using.
Sent from my Pixel 3 using Tapatalk
19" VMR VB3 CSL reps w/ General G-Max 3 A/S, BMW Performance short throw shifter, CDV delete, M54B30 swap, and a redneck CAI.
That's what I have too. Honestly it works perfectly fine. I did upgrade it with ezabl. best mod ever, totally worth it lol
But you don't need any crazy expensive CAD. I think most people learn with TinkerCAD which is free. I went with Fusion 360, it was free for students. Now I think you get a year. But it's enough for you to just do stuff and figure out how to design shit. Mostly mechanical parts though. It has trouble for curvy stuff, you can do it, but it's just harder. I have experience with Solidworks from like 10 years ago, and I swear Fusion 360 is backwards in how it does some shit. But it's plenty good enough to do a lot of the stuff you would need. Then you got Blender, which is free, for stuff like organic models and curvy stuff. FreeCAD as well, which I think is harder to use than Fusion.
Start with TinkerCAD and make the jack pad. It shouldn't take you too long lol