Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397

    Inside door side plastic piece clips

    That cool ZHP carbon fiber design plastic panel can still get clipped in, but only the right two clips are still legit. The one on far left is broken, and to make matters worse, maybe from the Florida heat, the plastic panel has bent up and away from the door a bit so even if I fixed this, that pressure would cause problems again.

    So

    1. Do they sell replacement clips just for this part?
    2. Is there a safe way to bend back the plastic piece, maybe with the help of a heat gun?

    Sent from my ONEPLUS A6013 using Tapatalk
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

  2. #2
    Join Date
    Jun 2012
    Location
    Socal
    Posts
    1,739
    are you talking about the white pieces? yes they have replacements.
    what bending are you talking about? I can't tell from the picture

  3. #3
    Join Date
    Nov 2016
    Location
    Charlotte, NC
    Posts
    3,130
    FYI those clips can be removed by sticking a large screwdriver into them, turning 90 degrees, and pulling straight out. Easiest to swing by a parts yard and fill your pockets with them.

  4. #4
    Join Date
    Feb 2013
    Location
    Austin TX
    Posts
    7,606
    P/N is 07-14-9-158-194.
    2005 IR / black / 6MT
    157,000 miles

  5. #5
    Join Date
    Aug 2014
    Location
    Leesburg, VA
    Posts
    1,209
    Quote Originally Posted by fredo View Post
    P/N is 07-14-9-158-194.
    It's weird that realoem doesn't show that part used on the coupe.
    2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats

  6. #6
    Join Date
    Oct 2017
    Location
    Southington, CT
    Posts
    1,376
    isn't that a sedan? I don't have that trim on my convertible either
    Pete


  7. #7
    Join Date
    Jan 2014
    Location
    OC, CA
    Posts
    322
    Coupes and verts have cube trim on the armrests, unlike sedans which have individual pieces on the door cards.


    2004 BMW 330CI ZHP, Silver Grey Metallic, Dinan: Stage 2 Software, High Flow Intake,
    Free Flow Exhaust, Front Strut Bar, Stage 2 Suspension System, Staggered Hartge Replica Wheels,
    M3 Mirrors (Side and Interior), M3 Seats

  8. #8
    Join Date
    Aug 2014
    Location
    Leesburg, VA
    Posts
    1,209
    Quote Originally Posted by pedro2u View Post
    isn't that a sedan? I don't have that trim on my convertible either
    OP has a sedan. I have a coupe & looked up the part for reference/fun = no application.
    2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats

  9. #9
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397
    Quote Originally Posted by sillieidiot View Post
    are you talking about the white pieces? yes they have replacements.
    what bending are you talking about? I can't tell from the picture
    You see how it's curling away from the clips?

    Meaning even with new clips, there'll be constant pressure away from the door causing possible detachment again.

    Should I risk using a heat gun or some other temperature related technique to fix this, or will the replacement clip be strong enough to overcome this ....

    Sent from my ONEPLUS A6013 using Tapatalk
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

  10. #10
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397
    Quote Originally Posted by fredo View Post
    P/N is 07-14-9-158-194.
    You are always DA MAN

    MUCH appreciated

    Sent from my ONEPLUS A6013 using Tapatalk
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

Page 1 of 3 123 LastLast

Similar Threads

  1. Driver side right side plastic panel loose/curled out
    By Dathaeus in forum Mechanical | Troubleshooting
    Replies: 1
    Last Post: 04-24-2017, 03:49 AM
  2. Screw Extraction from Intake for Plastic Distribution Piece
    By roadbiker_2 in forum Mechanical | Troubleshooting
    Replies: 1
    Last Post: 02-15-2017, 03:02 PM
  3. What is the part number of the plastic piece behind the lower grill?
    By wookim.design in forum General -- ZHP Related
    Replies: 3
    Last Post: 11-11-2015, 11:23 AM
  4. WTB: Headlight Vertical Aim Motor Plastic Connector Piece (White)
    By derbo in forum ZHP-Related Parts & Accessories (no vehicle sales)
    Replies: 0
    Last Post: 02-08-2015, 05:42 PM
  5. Side Skirt Clips
    By johnnyrad in forum Mechanical | Troubleshooting
    Replies: 3
    Last Post: 03-26-2011, 09:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •