My Mystic Adventure...

[fredo]

It's real simple fredo. Change the VO so the car does not have headlight washers, program the headlight washer to be deactivated and swap out the reservoir for one w/o headlight washer. That's it.

That sounds good, thank you.

[cakM3]

I got some wheel cleaners from BMW today and placed an order for a passenger side skirt to replace the wrong damaged one that is on my ZHP at the moment.

MTEC II side skirt - Right side (p/n: 51-71-8-211-944)

MTEC II side skirt - Left Side (p/n: 51-71-8-211-943)

[cakM3]

My windshield washer reservoir from FCP Euro came in today. I will install this once we have decent weather. Not too thrilled doing any kind of car work in cold windy conditions……


Sent from my iPhone 11 Pro Max using Tapatalk Pro

[cakM3]

I think once things settle a little regarding mod parts acquisition... (CSL air box for my M3, Wilwood BBKs and an additional BBS CH wheel for my ZHP), I will be looking to get a Garbino-style carbon fiber lip spoiler and carbon fiber rear MTEC II dissuser sometime this summer since the car won't be fully repainted just yet...





Gives you an idea just how nice the carbon fiber rear diffuser panel will look installed on blauzed...




With my CSL bootlid mounted, these additional carbon fiber bits (thanks to the carbon fiber fairies) should look really nice on my blauzed.

[san]

I’d be interested in your wilwood BBK project. I looked into it briefly when my zhp needed new rotors and pads but I went with OE replacements.


Sent from my iPhone using Tapatalk

[cakM3]

I’d be interested in your wilwood BBK project. I looked into it briefly when my zhp needed new rotors and pads but I went with OE replacements.

When I get this kit to install it sometime during the June-July time frame, I will take pictures of the kit first then during the install process just like how I did when installing my Brembo GT BBKs on my M3...

[cakM3]

Got my M-door sills and windshield washer w/o headlight washer installed this afternoon... the door sills look perfect on the ZHP. What these cars should have come with from the factory in my opinion.

Driver's side:




Passenger's side:




My new windshield washer reservoir w/o headlight washers:


Now on to other things

[JPMo]

I think once things settle a little regarding mod parts acquisition... (CSL air box for my M3, Wilwood BBKs and an additional BBS CH wheel for my ZHP), I will be looking to get a Garbino-style carbon fiber lip spoiler and carbon fiber rear MTEC II dissuser sometime this summer since the car won't be fully repainted just yet...





Gives you an idea just how nice the carbon fiber rear diffuser panel will look installed on blauzed...




With my CSL bootlid mounted, these additional carbon fiber bits (thanks to the carbon fiber fairies) should look really nice on my blauzed.

Where were you going to source the Garbino style lip? I wonder how difficult would it be to try to get an actual Garbino from Japan. Especially if we can get a few people interested as I'd love to get one, price dependent of course

[BADCLOWN]

Charlie and I are getting the one pictured above. I inquired with the mafia about a GB for a lip and nobody responded. The don’t make the actual garbino lip anymore to the best of my knowledge

[cakM3]

Where were you going to source the Garbino style lip?

https://www.ebay.com/itm/G-STYLE-CAR...53.m1438.l2649

Charlie and I are getting the one pictured above. I inquired with the mafia about a GB for a lip and nobody responded.

This is true... as I have posted earlier, I'm going with the G-style lip because it will be cheaper in the long run and I won't panic if I hit or drag the lip over something as I would having an authentic Garbino lip on my car...

I wonder how difficult would it be to try to get an actual Garbino from Japan. Especially if we can get a few people interested as I'd love to get one, price dependent of course

the price would equate to $548 but then you would have to deal with customs and shipping charges for this item which will drive it over the $1000 mark. Stuart went this route for his wagon and the part is truly a work of art

They don’t make the actual garbino lip anymore to the best of my knowledge

I went to the Garbino web site and it looks like they still sell this lip for the MTECII bumper. It is still on their web page for purchase.





http://www.garbino.net/bmw/bmw/index.html