I just sourced replacement inner door weather seals for my ZHP this morning...
Capo
I just sourced replacement inner door weather seals for my ZHP this morning...
Last edited by cakM3; 02-01-2022 at 01:40 PM.
Capo
Parts are coming in for my rear sunblind retrofit. The rear sunblind assembly arrived from Riga, Latvia today
Time to inspect, clean and test operate the assembly
Sent from my iPhone 11 Pro Max using Tapatalk Pro
Last edited by cakM3; 02-01-2022 at 01:41 PM.
Capo
I cleaned and then tested my sunblind assembly. Everything works perfectly as expected
With sunblind extended
Sent from my iPhone 11 Pro Max using Tapatalk Pro
Last edited by cakM3; 02-01-2022 at 01:42 PM.
Enforcer
Awesome. Always wanted this mod on my sedan
Messaggero
SameOriginally Posted by sna77
Sent from my SM-G988U using Tapatalk
Capo
As soon as my fasteners arrive from FCP Euro, I will begin the process of retrofitting the rear sunshade assembly into my ZHP. I want to remove the rear parcel deck shelf and take everything off and then refinish the surface so it is nice and black again after making the cutout for the rear sunshade assembly. Then reassemble everything, run the wiring harness all the way to the conector plug for the switch module then wait for ECS Tuning to ship out my switch module so I can have everything finished.
Since my rear subwoofers are ready to be reinstalled, I will also be swapping out my subwoofer housings for fresh subs. Then when BAVSOUND speakers arrive, I can install them and be finished with that part of the refresh. Still lots of work to do to completely refresh this car...
Last edited by cakM3; 02-01-2022 at 01:43 PM.
Capo
Turns out I can save my cracked BBS CH wheel so I will be taking it to be repaired then refinished so it looks brand new before mounting fresh Michelin Pilot Super Sport 4S tires on my BBS CH wheels for the 2022 car season
Just to refresh, this is how my BBS CH set will look on my ZHP
I will be mounting 235/35 19 front and 255/30 19 rear. I will first install my Bilstein PSS10/Ground Control Camber kit to the ZHP before the BBS CH wheels get mounted... guess I better be sourcing my titanium wheel bolts soon
Sent from my iPhone 11 Pro Max using Tapatalk Pro
Last edited by cakM3; 02-01-2022 at 01:43 PM.
Messaggero
Looks fantastic Charlie!
--Bryant
2004 330i ZHP Imola | 6MT | /// Coby Tri-Stitch Wheel | Khoalty Angel Eyes | eBay Headers | Euro RCR Light Package | Vibrant Performance Custom Exhaust
Capo
Thanks Bryant!
Last edited by cakM3; 02-01-2022 at 01:43 PM.
Capo
Aluminum sliders have been installed on my rear sunshade assembly today. All that is left is having some nice weather so I can start taking apart the rear interior of the sedan to remove the rear parcel shelf, make the cut where the rear sunshade will mount, then reapply black fabric paint to restore the parcel shelf, route the wiring so that it is run from the back to the center console switch module plug and I will be finished with that part of my rear sunshade retrofit until the new switch module arrives.
Also received a notice from BAVSOUND that my new speakers have shipped and will be arriving in a few days... perhaps I can do the rear sunshade retrofit as well as a complete speaker refresh including new subs... should make for a fun day
First projects for the 2022 car season . . .
Last edited by cakM3; 02-01-2022 at 01:35 PM.
Posting Permissions
Reply With Quote
