Nice work Charlie!!!
This morning I got to do the very last part for my M3 gauge cluster mod.... resetting the wheel angle sensor on my ZHP using INPA. Botond usually does all my coding needs but he is away on vacation in Florida so I had to figure out how to use INPA to do this final task. Thankfully I was able to reach Botond for some technical assistance... my cable was set to COM 4 and needed to be set to COM 1 in order to communicate with INPA so I was able to do this when Botond reminded me of this factThen I found a YouTube video which showed me where to go in INPA to reset my wheel angle sensor and I was able to accomplish this one final task for my mod...
![]()
The M3 gauge cluster mod is officially complete on blauzed![]()
M3 Cluster looks awesome! What was the turnaround time on Fixels getting the cluster done and back to you?
Last edited by cakM3; 09-26-2021 at 08:54 AM.
If you have to get one of these brand new, this is what you will pay to have a new intake from Gruppe M...
Looks like I found a used one for $400 + shipping...![]()
Last edited by cakM3; 09-29-2021 at 07:33 AM.