My Mystic Adventure...

[cakM3]

How did you attach the lip?

John, this is an example of the actual lip spoiler I just purchased today. How it will look once installed on my ZHP. There will be a few self threading screws to attach under and 3m double-sided tape. If there are any gaps, I will apply black silicone to seal the edges to prevent any tiny pebbles from being trapped in-between.

[cakM3]

My new front lip spoiler arrived from the Ukraine today



BMW E46 Front Splitter Lip Spoiler MTech II Msport bumper - link to part


I will be installing this part over this weekend

[John in VA]

My new front lip spoiler arrived from the Ukraine today
I will be installing this part over this weekend

[cakM3]

Nice John . . . nice!


Sent from my iPhone 11 Pro Max using Tapatalk Pro

[cakM3]

My Power Steering hose sprung a leak on the low pressure side, not sure which one so I replaced all the low pressure side hoses:

- 32 41 6 750 155.....Intake Manifold hose
- 32 41 6 796 390.....Radiator Return hose
- 32 41 6 796 367.....Return Pipe hose

next on my list is to replace the high pressure power steering hose
- 32 41 6 774 215.....Pressure Hose Assembly


I'm thinking of replacing the power steering pump with a new LUK LF-20 power steering pump to completely refresh the system.

[spoonerDee]

Mystic Blue, one of my favs. Lookin good Charlie!

[cakM3]

Mystic Blue, one of my favs. Lookin good Charlie!

Thanks!


Sent from my iPhone 11 Pro Max using Tapatalk Pro

[cakM3]

changed out my phone mount for a powered Rennline phone mount. Fitment is excellent and when my iPhone is on it, the mount charges it






Sent from my iPhone 15 Pro Max using Tapatalk Pro

[cakM3]

I also sourced replacement A/B/and C pillars for my ZHP



the upper B-pillars were shot and new ones are just over $200 each so being able to source these was nice.


All I have left to refresh the interior is to redo the headliner and source the center acoustic sensor cover.


Sent from my iPhone 15 Pro Max using Tapatalk Pro

[John in VA]

So many goodies! Where did you source the pillar covers? New or recovered? Thanks!