Results 1 to 2 of 2

Thread: One headlight self-levels faster than the other & high beam shutter gets sticky

  1. #1

    One headlight self-levels faster than the other & high beam shutter gets sticky

    Hi all,

    I have a 2006 vert, and when I turn on the headlights, they dip down (as expected) but the drivers side moves back up quite a bit faster than the passenger side.

    A few months ago I replaced both headlight assemblies (ka-ching) due to failing high voltage wiring. This was happening before and after replacement.

    Is this normal?

    Also, I have an issue with the new housings where the high beam on the passenger side gets stuck on in cold weather (under 60F). Has anyone been able to lubricate/fix this or should I send back to FCP for replacement? Or not worry about it as it's super intermittent?


    Thanks!

  2. #2
    Join Date
    Nov 2014
    Location
    Portland, OR
    Posts
    9,944
    I need to confirm, but I believe mine does that as well, and always has.

Similar Threads

  1. Replies: 21
    Last Post: 04-17-2018, 09:48 AM
  2. Driver Side Headlight (low beam) not working; factory bi-xenons
    By asdfpirate in forum Mechanical | Troubleshooting
    Replies: 3
    Last Post: 03-31-2014, 02:59 PM
  3. Auto ZHP faster than Manual?
    By Smolck in forum General -- ZHP Related
    Replies: 36
    Last Post: 09-04-2012, 06:26 AM
  4. Replies: 20
    Last Post: 12-13-2010, 10:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •