Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 9 of 9
  1. #1
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397

    Toxic oil smell coming into car in idle

    So just replaced the 2 coolant pipes under the intake manifold and car is running fine but there is a burning toxic oil smell that I cannot place.



    • I ONLY smell it inside the car when car is in idle, not when it is moving
    • Smell is not coming from the vent, outside whether it is air/recirculating inside air, as I am smelling the vent air from the AC and it smells clean
    • It doesnt matter if I have the windows up or down, the smell comes into the car in idle
    • Smell starts pretty much within minutes of driving
    • Car temp is good this while time, coolant is good
    • Its been about 2 weeks not so I am thinking it cant be some spilled oil that is burning off, it should have all burned off already then
    • No visible smoke anywhere




    So I am just confused as to how the smell is coming into my car, and obviously where it is coming from and the cause.
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

  2. #2
    Check your valve cover gasket


    Sent from my iPhone using Tapatalk


    2006 Coupe | Black Sapphire Metallic | Natural Brown | Gruppe M Intake | Corsa TSE3 | Michelin PSS on Apex ARC-8 | Koni Yellows |

  3. #3
    I agree it sounds like blow-by. You might want to check other crankcase ventilation components like the oil separator.
    Everybody loves Fried Chicken

  4. #4
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397
    Quote Originally Posted by san View Post
    Check your valve cover gasket
    Right on dude....
    I think I found my future and forever mechanic FINALLY OMG, right next to my new cryptocurrency mining office, wow!

    So at first he said it might be just the gasket so quoted me $75 part + $180 labor, guessing $90 /hr, not bad right?
    Then after further inspection when they actually took it apart said I also need the cover so then it came out to 265 + 180 = 480 (tax)

    Was this pricing fair?
    Otherwise he is really nice guy speaks like real English, and nothing else is wrong in the car as I feel now from his work (u know what I mean)
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

  5. #5
    Join Date
    Aug 2014
    Location
    Leesburg, VA
    Posts
    1,209
    Original BMW valve cover are $475-525. Aftermarket like Vaico or Rein are $273-302 from FCPEuro.
    2006 330ci ZHP - Silbergrau Metallic / Stoff Laser/Anthrazit / Alu Black Cube trim / Adaptive Xenon headlights / HK hi-fi system / heated front seats

  6. #6
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397
    Quote Originally Posted by John in VA View Post
    Original BMW valve cover are $475-525. Aftermarket like Vaico or Rein are $273-302 from FCPEuro.
    So he used aftermarket and did not overcharge me

    Sent from my ONEPLUS A6013 using Tapatalk
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

  7. #7
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397
    This is the one he got and installed, I guess its similar to the FCP ones?

    https://www.autozone.com/chrome-and-...5510/76064_0_0
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

  8. #8
    Join Date
    Feb 2013
    Location
    Austin TX
    Posts
    7,623
    ECS Tuning has the URO valve cover:

    https://www.ecstuning.com/b-uro-part...127512839~uro/

    I think you are ok.
    2005 IR / black / 6MT
    157,000 miles

  9. #9
    Join Date
    Dec 2012
    Location
    Palm Beach County, FL
    Posts
    397
    Quote Originally Posted by fredo View Post
    ECS Tuning has the URO valve cover:

    https://www.ecstuning.com/b-uro-part...127512839~uro/

    I think you are ok.
    Ok awesome thanks!

    Sent from my ONEPLUS A6013 using Tapatalk
    __________________________________________________ ____
    2003 ZHP 4dr | 145,000 miles (ACTUAL before RIP) | BBS 17"
    Hankook Ventus V12
    Front: 225/45ZR
    Rear: 255/40ZR-17 Hankook Ventus V12 evo2 XL
    [ Staggered on square (17x8.5 +38) ]

Similar Threads

  1. Replies: 6
    Last Post: 11-09-2015, 04:56 PM
  2. Burning oil smell
    By midlandtech in forum Mechanical | Troubleshooting
    Replies: 15
    Last Post: 09-30-2013, 05:55 AM
  3. Can you smell that smell?
    By ryankokesh in forum Mechanical | Troubleshooting
    Replies: 15
    Last Post: 02-25-2013, 07:44 AM
  4. Gas Smell
    By kakashi169 in forum General -- ZHP Related
    Replies: 7
    Last Post: 01-24-2013, 06:13 AM
  5. How do I get rid of skunk smell???
    By antcamp in forum General -- ZHP Related
    Replies: 9
    Last Post: 11-19-2011, 11:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •