2005 ZHP 330ci convertible Headlight lens Replacement: Where to purchase?

[t.er]

I started a re-finish process but errored by letting the polisher remain on a stubborn mark too long ... discolored the plastic ... too hot. I was so close to fully removing the mark but did not realize the heat issue.

If it's discoloured just on the surface, you could try to sand it out? Going with the clear-coat route, you have to sand up to 800 grit anyways, so it's possible you could get that burn mark off with a lower grit.



Sent from my SM-G781W using Tapatalk

[wellcraft]

I just removed the lenses from my headlights today and I didn't use the oven l, I just used a heat gun. Super easy, it took me probably a bit over 5 minutes to do each headlights. I was actually surprised as to how easy it was.i did a set of taillights a few years ago and those a pita.

[Satcho]

I received a response from Spyder (https://www.spyderauto.com/home.php)

The only headlights offered for the 2005 model will be for a halogen
headlight from OE.

We do not currently have a Xenon/HID model.

[wellcraft]

I received a response from Spyder (https://www.spyderauto.com/home.php)

The only headlights offered for the 2005 model will be for a halogen
headlight from OE.

We do not currently have a Xenon/HID model.

When you say xenon/HID light, do you mean halogen plus xenon? That's what I have and I wanted to replace my lenses but I now realized they are not available.

[sillieidiot]

This is why I collect the lenses lol I think I have like 2 pairs. But mines never going to go bad cause I have PPF on lol I've been meaning to sell them, but too lazy to take it out of storage.

[Satcho]

This is why I collect the lenses lol I think I have like 2 pairs. But mines never going to go bad cause I have PPF on lol I've been meaning to sell them, but too lazy to take it out of storage.

I believe you are correct. One halogen and one bi-xenon dynamic

[Satcho]

I did not trust the information that the Ebay sellers because they could not confirm fitment nor provide BMW part #s for cross-referencing.

I purchased a pair Umnitza ... more money than I anticipated but it depends on what you add ,,, such as angel eyes $230, and I sought to retain the "dynamic" features so another $60, and $30 film protection for lenses. Ultimately a total of $1000 for a pair which includes the bulbs and ballasts.

I asked BimmerJakes if they had the complete assembly ...NO.

The only other potential option is Retrofitlab. A little slow to reply. You retain your bulbs.