Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 3 of 3
  1. #1

    P-0305 Misfire on cylinder 5

    Hello all! Hope everyone is doing good.

    Leaving my neighborhood the car started running like garbage and threw a check engine so I limped her home and checked the code. Seems like the starting point for the P-0305 is ignition coils and new spark plugs.

    My question. Should I just replace all coils at once, or just the one? NGK seems to be the replacement that everyone likes.
    Anything else I should know/check?

    Thanks
    Matt

  2. #2
    Join Date
    Jul 2016
    Location
    Boston, MA
    Posts
    133
    Quote Originally Posted by Glitch View Post
    Hello all! Hope everyone is doing good.

    Leaving my neighborhood the car started running like garbage and threw a check engine so I limped her home and checked the code. Seems like the starting point for the P-0305 is ignition coils and new spark plugs.

    My question. Should I just replace all coils at once, or just the one? NGK seems to be the replacement that everyone likes.
    Anything else I should know/check?

    Thanks
    Matt
    Move the coil from Cyl 5 to cyl6 and move the spark plug from cyl 5 to cyl 4 and see if mis-fire moves with either.

  3. #3
    Looks like it was the ignition coil. Went out and replaced it after diagnosing. Misfire is gone Thank the lord.

Similar Threads

  1. Cylinder #6 Misfire, only at ~6krpm
    By DeathTrap in forum Mechanical | Troubleshooting
    Replies: 32
    Last Post: 02-24-2020, 08:25 AM
  2. Help/Advice-misfire (long-ish)
    By Washburn in forum Mechanical | Troubleshooting
    Replies: 12
    Last Post: 03-29-2015, 08:02 AM
  3. P0302 cyl 2 misfire
    By Washburn in forum Mechanical | Troubleshooting
    Replies: 2
    Last Post: 03-07-2015, 04:55 PM
  4. Misfire cylinder 1 & 5
    By PirateZHP in forum Mechanical | Troubleshooting
    Replies: 24
    Last Post: 12-04-2013, 10:26 AM
  5. Misfire cylinder 1
    By Tampa330i in forum Mechanical | Troubleshooting
    Replies: 14
    Last Post: 04-02-2013, 09:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •