Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: 2004 TiAg ZHP

  1. #11
    Join Date
    May 2020
    Location
    SF Bay, CA
    Posts
    1,138
    Welcome and clean car! Also damn that's quite the rats nest of wiring for the laser jammer
    2004 BMW 330CI ZHP (well, technically ZAM)


  2. #12
    Thank you all for the kind comments so far!

    Quote Originally Posted by BMWCurves View Post
    Looks great! I wish the front plate delete/relocation was as easy on coupes as they are on sedans
    One of the biggest reasons I picked the sedan over the coupe is the ease of working on things (ex. headlights! I refuse to bake anymore headlights open haha)

    Quote Originally Posted by Will View Post
    Congrats, the car looks great!
    Looking forward to the progress, especially the dash cam and wiring!
    D'oh! I'm terrible at keeping journals since most of the time I just want the car back together again to go for a drive. I'll go back at some point and snap some photos but the connector I purchased just connects to the homelink for power.

    Quote Originally Posted by t.er View Post
    Welcome and clean car! Also damn that's quite the rats nest of wiring for the laser jammer
    Yeah it was quite an adventure relearning how to take my dash trim apart again...at least it's gone for now! Hopefully no more quirky wiring!
    Last edited by S2Ace; 09-26-2022 at 10:44 PM.

  3. #13
    Nothing fun yet...more preventative maintenance (sort of!)

    9/18
    Replaced the cooling system with the FCP euro kit. No leaks so far but learning the BMW bleeding procedure was an interesting process. Was second guessing myself for a few days but the coolant level has stabilized after 2-3 days of driving and no leaks or overheating, woohoo!

    Also took the time to crawl under the car and inspect all the suspension components:
    -Both forward diff bushings have cracks
    -Rear diff mount has cracks
    -Very very slight oil weep at the differential inspection cover (noted by previous owner). No dripping on the floor yet. Just a wet look at the bottom of the differential

    At least I can probably knock all three out at the same time and reseal the diff as well. Not looking forward to dropping or lifting the diff back up

    -Shocks and struts on their way out...probably have to look at replacement sooner than later. I can see some leaking at the front struts and the rear shocks are just a little bouncy. Deciding between going OEM again or KW V1s. Anyone have experience with the reinforcement plates and how much height they add?


    9/26
    CCV Replacement. During one of the test drives, i noticed oil weeping out some of the valve cover grommets. I had the same issue on my old wagon and believe the CCV has failed creating too much pressure and forcing oil out of areas that shouldn't? I haven't noticed any additional oil after cleaning but decided on replacing the CCV anyways. It was still the original unit so it had to go... Also bought a spare valve gasket set just in case (Previous owner had the gasket replaced along with a new cover) but hoping to save it for a VANOS reseal. I can feel the stutter at higher RPMs.

    Cleaned the ICV and TB while in there



    I was today years old when I learned that the cap can be used to hold the straw...I've been reusing the tape for years...


    Disassembled everything ahead of time on sunday while waiting for parts to arrive on monday. Decided to break open the old one to see what goes on in there. Assuming the diaphragm got stuck during one of my cooling system test drives (I did do a few short trips....)



    After replacing the CCV, not sure if it was my butt dyno but the throttle response feels like it's improved...? I don't have to give it as much input for 1st and 2nd. Could just be also not driving her for a few days lol.

    Here's a couple of phone photos from the long test drive after the CCV replacement. God I love the side profile of E46s:



    Should probably dust off my camera at some point...
    Thanks for following so far! Hopefully I get to do some more interesting things at some point. Hoping to take her on a spirited drive at some point in the next few weeks.

    Planned next major maintenance items (in no particular order):
    -Drivetrain fluid change
    -Diff bushings/mounts
    -VANOS reseal
    -New suspension (?)

  4. #14
    Join Date
    Jan 1970
    Location
    Southern California
    Posts
    18,026
    Nice werk.

    Sent from my SM-F936U1 using Tapatalk
    Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
    "ZHP or not, I still like you"


    ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
    ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
    Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
    Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
    BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
    Note: Actual car no longer resembles signature picture

  5. #15
    No maintenance photos to add but here's the updates so far:

    10/3 - Reseal VANOS and anti rattle kit. New valve cover gasket set

    10/8 - Replaced the final stage resistor unit

    10/13 - MT Fluid drain and fill

    Upcoming:
    -Ordered diff bushing set and transmission mounts



    Took a long drive since it's been sitting in the garage all week (rotating cars since wife is working from home). Here's a couple of phone photos:


  6. #16
    Join Date
    Mar 2011
    Location
    Independence KY
    Posts
    2,713
    Those are great pics!
    2005 BMW 330i ZHP - BMWP brakes/intake/strut bar/shifter, Coby wraps interior, BBS CHs, Eagle Eye LED tails, LED fog lights, GC coilovers, Sprint Booster/sport button mod, 4.5 LCM w/ programming, Xtrons 9inch HU, BSW stg1, dynamat, M3 sedan dead pedal, oCarbon CF interior trim, CF seat backs, 2x2 CF MTECH2 diffuser, CF cabin filter cover



  7. #17
    Another small update! Dropped the pumpkin for Halloween!
    -Replaced the front and rear diff bushings/mount (cracks everywhere!)

    -Resealed the output shafts and the inspection cover since diff was already out and not expensive to reseal. Didn't have the right socket to remove the input shaft so left it alone since there was no leaks

    -Replaced the transmission mounts

    Reading threads online made the job seem a lot harder than it actually was. Everything came out smooth and went back in smooth. Hardest part was just bringing down and lifting the rear diff back up. Car drives a lot more smoother now and the rear end clunk has disappeared! Getting closer to finishing up maintenance to a level comfortable for me and hopefully move on to more fun things.









    The near 20 year old paper gasket was frustrating to remove...thank god they aren't made anymore.

  8. #18
    Join Date
    Nov 2012
    Location
    22841
    Posts
    9,885
    That gasket is the worst and so is the smell of gear oil.

    Any leaks from the oil pan?

    His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |

    Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |

  9. #19
    Join Date
    Feb 2013
    Location
    Austin TX
    Posts
    7,245
    Well done, man. The differential and transmission mounts are on my radar.
    2005 IR / black / 6MT
    153,000 miles

Page 2 of 2 FirstFirst 12

Similar Threads

  1. 2004 bmw zhp 330i silver Tiag
    By charter21p5 in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 15
    Last Post: 08-26-2018, 03:36 AM
  2. 2004 Tiag/Alcantara 6mt sedan, 83k, $11k, WA
    By SSBMW in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 5
    Last Post: 05-17-2017, 02:43 PM
  3. ReckLesS 2004 TiAg Coupe
    By Reckless in forum Projects
    Replies: 11
    Last Post: 03-10-2014, 10:37 AM
  4. 2004 330i ZHP 6MT, 41k miles, $15k, TiAg, NY
    By WolfBMW in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 13
    Last Post: 11-13-2013, 08:43 PM
  5. 2004 Coupe TIAg/Alc 6mt 82k $14.5 (Salt Lake)
    By E_Rak in forum BMW 330 ZHPs For Sale (vehicles only)
    Replies: 0
    Last Post: 09-06-2013, 09:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •