Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 3 of 3
  1. #1

    I did... a lot of work

    Just finished the inspection.

    Over the past few weeks I've done the following:
    Replaced all the rear suspension and subframe bushings.
    New Differential Fluid
    Installed and wired a hitch I bought in Germany
    Sanded and clear-coated the headlights, side marker lights, turn signal lights, and rear lights
    Replaced the clutch, rear main seal (do NOT oil the crankcase when installing, and let sit for 4 hours before touching), input shaft seal, some of the shifter bushings, and transmission fluid
    Replaced fender liners that had shit themselves, re-wired the horns that the previous crimps had fallen out up, re-installed the front bumper correctly that the body shop had fucked up, soldered and wired the new OAT sensor to take care of a CEL
    Alignment, obviously. My front caster (I think that's what it is) is as far as it will go and is completely off, but completely off on both sides equally so shouldn't cause trouble.
    Oil change (with the liqui-moly flush shit)

    I made a thread about it, and I'm happy to say I did it all:
    http://www.zhpmafia.com/forums/showt...302-It-Is-Time

    Last thing to do is figure out my passenger side interior trim.

    Yeeeeeesh
    Everybody loves Fried Chicken

  2. #2
    Join Date
    Jan 1970
    Location
    Southern California
    Posts
    18,022
    Nice werk.

    Sent from my SM-F936U1 using Tapatalk
    Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
    "ZHP or not, I still like you"


    ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
    ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
    Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
    Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
    BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
    Note: Actual car no longer resembles signature picture

  3. #3
    Thanks
    Everybody loves Fried Chicken

Similar Threads

  1. Anyone work for BMW/Mini?
    By BADCLOWN in forum General -- ZHP Related
    Replies: 3
    Last Post: 02-07-2021, 08:01 PM
  2. Would these wheels work?
    By munroe7 in forum Wheels
    Replies: 9
    Last Post: 06-23-2015, 06:41 AM
  3. Replies: 6
    Last Post: 03-27-2014, 07:44 AM
  4. MT work?
    By Scorpius in forum Maintenance
    Replies: 27
    Last Post: 11-08-2011, 10:41 AM
  5. Fun at work....
    By TRELO in forum Everything Non ZHP (the place for non-ZHP photos)
    Replies: 12
    Last Post: 05-29-2011, 07:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •