~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Last shot of the carbon trunk before it gets repainted back to TiAg. Weather has been rather...odd...here in VA. So that'll be getting painted in the washroom. It's rather ridiculously large for some reason. Think the previous home owner used it as a pantry. I'll tell the fiance after the fact. Plenty of time while the car is hiding for the winter. Hood will get the same treatment later on.
Eventually I'll be pulling the front bumper off and either repairing or replacing it. After many, maaany cross country trips and track days, it's at the end of its lifespan.
Sent from my moto z4 using Tapatalk
Last edited by Fenrir; 12-29-2020 at 04:45 PM.
AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, CP Forged Pistons & SP Forged Con Rods, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
-Ben
AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, CP Forged Pistons & SP Forged Con Rods, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
-Ben
~ 2005 330ci ZHP Silbergrau | Black cube | Leather ~
Current Mods: Akebono brake pads, Bilstein B4 Rear Shocks, Beisan Systems VANOS Rebuild, G.A.S. DISA O-ring, Morimoto fog lights, StopTech SS brake lines, Subwoofer tennis ball mod, Switchback Angel Eyes (turn signal), Zimmermann drilled rotors.
My project thread ---> http://www.zhpmafia.com/forums/showt...into-a-reality
Pretty much sanding the whole thing down and repainting. There's a hairline crack under my passenger fog lamp. That, I'll probably use some fiberglass on the underside to seat it and maaaybe a polyurethane to seal the top side of the crack. Then sand it again. It's worked on a few projects before for minute issues. But, I'll need to make sure it will play nice with the surrounding bumper plastics and whatever base coat I use.
Next thing is to look at the plastics behind the bumper. When these things get old, the clips mounted on the bumper will break, causing the edges to pull away from the underside of the headlights. I'm hoping anything I find behind it is repaireable to some extent.
Honestly? If it's too far gone, I may just bite the bullet and pick up another ZHP bumper in the primer and start fresh.
Last edited by Fenrir; 12-29-2020 at 12:13 PM.
AFE stage 1 CAI, Silicone Stett Intake Boots, AA Headers and Exhaust, AA Tune, Cat Delete, Hicon GT Adjustable Coilovers, Quaife Helical LSD, EVO 3 SS Kit, UUC Organic Clutch w/ UUC LW Flywheel, GTR rep carbon fiber hood, CSL rep carbon fiber trunk, CDV delete, CP Forged Pistons & SP Forged Con Rods, MotoZ projector headlights, Sony bluetooth/touch nav, & lots of love
-Ben
That hood is a beauty!
Sent from my SM-G988U using Tapatalk
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
After the white Christmas we had in Kentucky, I washed the salt away today.
325i, 2005, 5MT, Silvergrey, leatherette, Sport package; CDV delete, KONI STR-T & KYB Excel-G, Weisslichts, Stewart H2O pump
328i, 2010, 6MT, Spacegrey, dakota leather, M-sport packages; has a 330 intake but no tune - yet
First bath and joyride of 2021.
Sent from my Pixel 5 using Tapatalk
- Marc
Felt great this morning being back at Huntsville Coffee n Cars, with my ZHP! Put a few mor miles on her too.
Sent from my iPhone Xs using Tapatalk
Dinan; Hign Flow Intake System, & Strut Tower Brace
Turner Motorsports; Underdrive Power Pulleys
Koni Sport, Bridgestone; Potenza RE-11, Coby Wheel
Stewart High Performance Water Pump
Hawk High Performance Street 5.0 Brake Pads
Brembo Rotor
The purposeful face of a formidable athlete:
The spine-tingling 330i Performance Package.
Purchased CPO on 12/23/2006 with 28,090 miles