Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 10 of 31

Threaded View

  1. #1

    DIY - How to load up NCSEXPERT

    This is an attempt at writing a comprehensive guide on how to correctly load up NCSEXPERT. With time it should be fairly complete but for now a rough draft should get most everyone started.

    You will need (INSTALL FIRST) EDIABAS 6.4.3 and EDIABAS 6.4.7 (RUN THE SETUP.EXE UNDER PROGRAM INSTALLATION FIRST, REBOOT THEN RUN REFERENZE/INSTALL/INSTPROG.EXE AND UPGRADE) installed on your machine.

    and V40 e46 progman files found here E46.zip
    I would also recommend to use any of the included profiles to read modules and exclusively use revtors profile (ATTACHED) (or make your own) to do any coding. Once you are comfortable coding modules you can run revtors profile exclusively for both read and write.

    To install the profile copy the .pfl into NCSEXPER/PFL folder or EC-APPS/NCSEXPER/PFL

    Once, you have downloaded the V40 files mount the iso using DAEMON tools. Then browse to the daten folder. Inside it you will find LADEN.bat. Run it and choose yes on all the prompts.

    This effectively updates NCSexpert files to prevent CHASSIS is faulty and VIN is faulty errors.

    RANDOM TIDBITS:

    Use repxet as the password under file/edit profile to create your own profile.

    TROUBLESHOOTING

    COAPI-1020: can not open file for reading
    C:\NCEXPER\WORK\FSW_PSW.MAN

    Fix: open up notepad, choose save as, name the file FSW_PSW.MAN and drop in the path shown above or your WORK folder. (MAKE SURE IT'S NOT SAVED AS A .TXT file)

    Additionally, I've attached a copy of NCS with all the above steps shown above. Simply delete or rename your C:\NCSEXPER folder and extract the zip in its place.

    Should work error free but as always if any come up please let me know!

    NCSEXPER_E46V40LOADED

    password is e46
    Attached Files Attached Files
    Last edited by VA//M3; 07-25-2011 at 11:15 AM.

Similar Threads

  1. Pages slow to load - just FYI
    By Washburn in forum Suggestions & Ideas
    Replies: 8
    Last Post: 12-06-2010, 11:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •