Capo di tutti capi
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Enforcer
Nice, thanks Dane. I am going to be replacing my C-Pillars this weekend.
-JJ
2005 Zhp Sedan (Sold), back in the 2004 Allroad 2.7t
Capo di tutti capi
Sweetness....
Don't remove the rear seat...lol
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Enforcer
Yeah, thanks I saw that on the DIY. I might anyway, I am going to be getting my rear windows tinted so I might clear it all out so they can't mess anything up.
I got my pillars in the mail today. It is odd though, they seem to be different than the ones I have. The ones on the car look more like a carpet material and the ones that came look more like the roof material and the material by the homelink area. I will have to wait and look at it better on saturday in the daylight.
-JJ
2005 Zhp Sedan (Sold), back in the 2004 Allroad 2.7t
Capo di tutti capi
Mmm....make sure it is correct. Whem I replaced my interior passenger sunshade....they sent me a vinyl one first....instead of the cloth.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Enforcer
They were correct, just looked different at first. I got them in finally. I painted the rear deck cause it was faded and had turned purple. Looks like new, now I just need tint.
-JJ
2005 Zhp Sedan (Sold), back in the 2004 Allroad 2.7t
Capo di tutti capi
Nice....ima limo tint my sunroof glass...and prolly go 25% all around.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Messaggero
About to do AB&C pillars on a relative's '02 E46 with the light gray headliner.
Anyone have experience with 3M Headliner Spray Adhesive for the job of reattaching the fabric to the pillars? I ask because that is what I have in-hand but I'll go buy the stuff pictured in Dane's DIY it it's better and or easier to deal with.
Also, Dane, please post a link to the A-pillar DIY you mention in your C-pillar DIY.
Founder of ZHPMafia.com
I'll shoot Dave -- over at 2M Auto Body -- a note about adhesives. I'll get back to you shortly.
Founder of ZHPMafia.com
Just talked to Dave. He swears by this stuff: 3M Super 77 Multi-Purpose Adhesive
He says that's what they use in the body shop. He says that Home Depot should have it. About $10-$12 per can.
Make sure it's 3M Super 77, he says.
Posting Permissions
Reply With Quote