NLFS
Anyone near Greenville SC want to check out an m5?
http://www.autotrader.com/cars-for-s...adius=100&mmt=[BMW[M5[]][]]&listingId=364477364&Log=0
NLFS
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Errgg, something wrong with that link. Just texted the guy today. His number is 330 351 1375
Anyone in central Pennsylvania willing to look this vert over for me? Located at Manheim Imports. I'm just about ready to pull the trigger but would like to have an impartial set of eyes give it the once over. I'd be driving the car back to central MO, so definitely needs to be road ready. Salesman has been upfront about the cosmetic issues so far.
http://www.cars.com/go/search/detail...C=CRTpdB306dyb
Certainly willing to pay for gas etc.
Thanks!
I'm looking at two different cars. Anyone in Seattle or Alabama?
http://gadsden.craigslist.org/ctd/4352264588.html
http://seattle.craigslist.org/see/cto/4383308449.html
Sent from my DROID RAZR HD using Tapatalk
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.
For the Seattle one it had front end damage to cause the salvage title, I'd like someone in the area to check it out and verify its looking good, as well as the Brembo brakes.
The one in Arkansas I'd like to get eyes on, it looks like there is something up with the front end, fogs are missing.
Is like both to be driven to get an idea of clutch life, I don't want to fly halfway across the country and have a bum clutch for the drive back.
Sent from my DROID RAZR HD using Tapatalk
My 7 year itch.
Mods: BimmerBrakes Headers, Magnaflow full system, BYS Cross Drilled and Slotted Rotors, Hawk HPS Pads, Racing Dynamics Intake, Dinan Throttle Body, Bavarian Auto Short Shifter, ECS Tuning Strut Bar, Projector Fogs, Blackout Grilles, Euro Smoked Tail Lights, Black Corner Lights.
Upcoming: Coil Overs, Sway Bars, Polyurethane Bushings all around, M3 motor mounts.