So I'm installing my predator v2 angel eyes and the instructions show a harness without a box on it. Mine have a white box (pictured below)
Did anyone else's have this? If so how did you route the wires out of the headlight?
So I'm installing my predator v2 angel eyes and the instructions show a harness without a box on it. Mine have a white box (pictured below)
Did anyone else's have this? If so how did you route the wires out of the headlight?
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
You should just be able to route the wires and box between the headlights and housing.
HTC Thunderbolt+TT
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
I tried but there isn't enough flex in the housing... I'm stumped as the instructions here... http://www.fastm.com/m3/angeleyes_orionv2.html show them without the box.
EDIT: is there more flex in the box than I think there is? I don't wanna break the housing but the box will require quite a bit of flexing to get it past
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
Finally got them in and functioning. It was a pain to get the run the wires through the headlights but I got it! They look so mean!
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD
Good news. pics!
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Good deal.
HTC Thunderbolt+TT
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Nice. In for pics and mounting solution.
Hankook Ventus V4's 205/55/16 | 16" BMW OE Style 45's | ECSTuning 15mm Spacers | Thule 45050 Crossroad Rack | Thule 870XT Fairing | LLumar 35%/20% Tint
Custom Vienna Austria Euro Plate | GoMiniGo "No-Holes" License Plate Bracket | Smoked License Plate Cover | Black License Plate Frame | Khoalty LED License Plate Lights
nice job waiting for some pics
I'll post some pics later today. I've done quite a bit since I last posted in my project thread so pics will be posted there
-Chris-
2003 ZHP Sedan - Jet Black on Sand - SOLD