I can't wait to the CSL bootlip painted on the ZHP, next the the ///M.
Messaggero
I can't wait to the CSL bootlip painted on the ZHP, next the the ///M.
Patrick ///04 330i ZHP///BMWCCA#465139///Jim Conforti Shark Injector///H&R Touring Cup Kit///Gruppe M Intake
08 E70 X5 (sold) 86 Porsche 944 NA (sold) 99 540i TiAg (sold) 98 328i hellrot (sold) 96 318iC black (sold)
Capo
Gonna happen soon....this is the next mod....Originally Posted by TheFinanceGuy
ZHP luv.....
Capo
As it usually happens....when I get ready to do a project the other car intervenesPainting of my CSL bootlid has to wait so I can address a very recent new maintenance issue with my ///M. Usually works out that way. Earlier this year my ZHP altered my plans to mod my M3 when I had to replace power steering hoses....as they say....s*** happens
So today I took apart my passenger's side headlight and fixed an issue I caused with them 6 months ago... all I have to do is wait till it gets dark to confirm my fix and aim my headlights.
While I was there I cleaned the area up a bit
I bent over that small metal piece on the shutter which allowed additional light to come out thru the projector....
You can see the cutout here looking at the inside part of the shutter. Why would they make a cutout here??? Can anyone explain that??
Anyway I bent that small metal part so it would cover that cutout again and hopefully this will be the end of that minor headache...
Well, at least I got to really clean my headlight assembly today...after I was finished with my headlight, I swapped steering wheels and installed my perforated leather steering wheel I acquired from Bruce.
Took out my alcantara steering wheel so I can get it properly cleaned....
That's one car somewhat finished.... now to address that maintenance issue with my ///M in the morning...
Sent from my iPhone5S using Tapatalk
Capo
finished aiming my passenger's side headlights then took the car out on a road test. No more annoying extra light emanating from the headlight like it did the first time I rebuilt it so problem corrected.
Capo di tutti capi
I thought that cutout was for city lights.
Sent from my SM-G925V using Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Capo
City lights are on the inside (H7) light side... not really sure what that cutout is used for in the projector side...maybe Botond can chime in on city lights...he has done a lot of research on city lights...
Wiseguy
I agree with Dane. .. I believe I could have just put a +1 though. High and low in one xenon lamp,
Capo
Here is a picture of an E46 with city lights on.... they are dimly lit where the inner High beam lights are.
Wiseguy
I really like that!
Here is a picture of an E46 with city lights on.... they are dimly lit where the inner High beam lights are.
Capo
There's a discussion started by Botond about city lights here
http://www.zhpmafia.com/forums/showthread.php?1214-City-lights
Posting Permissions
