Anyone know where to get a decent skid plate to guard my oil pan when I lower my car?
Anyone know where to get a decent skid plate to guard my oil pan when I lower my car?
: Umnitza angel eyes 6000k : HID lowbeams 6000k : HID foglights 3000k : Blacked out corner lights and sidemarkers : Smoked Eagle eye LED tail lights : 15% tint on all windows : powdercoated black 135s with Michelin Pilot Sport a/s : Koni adjustable coilovers with adjustable struts : AA tune : K & N cold air intake : Highline tuning cat back exhaust : CDV delete : 2 zhpmafia stickers (plus 25 bhp each) :
That's what the frame reinforcement does, no? It's covered bro.
http://www.realoem.com/bmw/showparts...56&hg=51&fg=75
http://www.ecstuning.com/Search/51717028433/ES128604/
![]()
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Didn't know about these... I want one now
You have one!!!!!
This is your car!
http://www.realoem.com/bmw/showparts...56&hg=51&fg=75
You're not supposed to drive without it.
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Aren't the ones on our cars made of plastic though ?
You should have one of those metal reinforcement plates protecting the oil pan and steering rack, then in front of that is a plastic shield. The front of the plastic shield connects to the bottom of the front bumper cover and the back of the plastic shield screws into that metal reinforcement plate.
Oh I see now.. I'm a bit new to the e46's.![]()
no worries, there is a learning curve. Just imagine all the stupid comments I make to shops on the E10 trying to compare it to other cars I've driven
All fang plate info move to Preventative maintenance section.
http://www.zhpmafia.com/forums/showt...ate-Info/page2
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
thanks dane i want a metal one because the one on my car now is plastic. I figured its better to be safe than sorry. oil pans arent cheap
: Umnitza angel eyes 6000k : HID lowbeams 6000k : HID foglights 3000k : Blacked out corner lights and sidemarkers : Smoked Eagle eye LED tail lights : 15% tint on all windows : powdercoated black 135s with Michelin Pilot Sport a/s : Koni adjustable coilovers with adjustable struts : AA tune : K & N cold air intake : Highline tuning cat back exhaust : CDV delete : 2 zhpmafia stickers (plus 25 bhp each) :