Well, it's about time
Car has been severely neglected from any proper washing technique. There was holograms all over the car, not to mention the PO had a clear bra installed and the installer actually cut the clear bra on the car, and CUT INTO THE PAINT!!!
Needless to say, I had my work up for me. I wasn't going for 100% correction, because with the amount of damage done, I knew it was going to be too much time, I looked at around 90-95%.
Products Used:
Wash:
Chemical Guys Citrus Wash and Gloss
2800 PSI Pressure Washer
2 Bucket Method
IronX
Clay:
Poorboys Clay
CG QD
Correction:
Makita 9227c
PC DA
M105
M205
LCC HydroPads
Protection:
Wolfgang 3.0 Paint Sealant
Dodo Juice Hardy Candy
Dodo Juice Rainforest Rub
Wheels:
Meguiars APC+
Poorboys Wheel Sealant
Meguiars Endurance Tire Gel
Exhaust:
Wheel Wax Metal Polish
Steel Wool #0000
Poorboys Wheel Sealant
Onto the Pictures!
Removing Clear Bra
You can see the damage done from the clear bra
Clear Bra Gone! Bye Bye Yellow!
Another Picture of the Clear Bra Installed Damage
Wash!
IronX doing it's job, it's bleeding!
IronX making the clay process pretty easy...barely nothing coming off the hood
Correction Time!
Close Your Eyes, this is scary
Correction Done!
Final Shots
Thanks for looking!