Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: 2012 SIGFest Tools list: need/have...

  1. #1
    Join Date
    Jun 2011
    Location
    Northborough, MA
    Posts
    304

    2012 SIGFest Tools list: need/have...

    I just thought with all the planned maintenance, we should get an idea of the expected tools to be available. Or what is needed by everyone.

    MAINTENANCE INFO

    Name - Maint Item

    2. Whitexi - May do the cooling system again if not done before the trip, may also bring a window regulator for each door
    3. Jayjay_dee - transmission fluid change and differential fluid too.
    4. cakM3 - VANOS seals replacement and anti-rattle kit (could use some help ) / new coils-spark plugs / rolling fenders if available
    5. static667 - REVISED 3/02/12: LCABs, tie rod ends, VANOS, and maybe a sunroof fix. BP will be doing some code work in there somewhere.
    6. az3579 - Depending on what breaks between now and then
    7: chad44- maybe clutch/flywheel upgrade or coil overs... Only time will tell.
    8. yousharenow- Front LCAB's (wiill we have the tools to do this?), Fuel filter ,Micro filter, Brake Fluid Flush. Maybe a head cover gasket
    9. Zell- New rotors on all 4/sandpaper brake pads to be flat (they're already basically new, no reason to buy new brake pads), entire cooling system, and if there is time, steering guibo.
    10. Mtnman-BP has to recode my car for halogen lights as high beams. (oh yeah, bp, wanna help me?) also wrench for hire for vanos/lcabs/suspension/etc
    11. rvariverguy - RTABs, computer flashing, small dent/paint repair?
    12. joelshow - rear brake pads and rotors...if I bring the parts can someone help with the install?
    13. iZHP - Sunroof shade, and a few other small fixes.

    Tools available

    1. Chad44: RTAB bushing removal/install kit
    2. Fender Roller, 1 low profile jack, 1 regular jack, 2 jack stands, 2 Rhino ramps, and all my tools will be available. I additionally have my archaeic method for tranny and diff fluid changes (Tygon hoses and funnels). If someone wants to bring pump....that would be awesome. We will also need several jacks/jackstands, tool bags.

    Sent from Tapatalk

  2. #2
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,874
    MAINTENANCE INFO

    Name - Maint Item

    2. Whitexi - May do the cooling system again if not done before the trip, may also bring a window regulator for each door
    3. Jayjay_dee - transmission fluid change and differential fluid too.
    4. cakM3 - VANOS seals replacement and anti-rattle kit (could use some help ) / new coils-spark plugs / rolling fenders if available
    5. static667 - REVISED 3/02/12: LCABs, tie rod ends, VANOS, and maybe a sunroof fix. BP will be doing some code work in there somewhere.
    6. az3579 - Depending on what breaks between now and then
    7: chad44- maybe clutch/flywheel upgrade or coil overs... Only time will tell.
    8. yousharenow- Front LCAB's (wiill we have the tools to do this?), Fuel filter ,Micro filter, Brake Fluid Flush. Maybe a head cover gasket
    9. Zell- New rotors on all 4/sandpaper brake pads to be flat (they're already basically new, no reason to buy new brake pads), entire cooling system, and if there is time, steering guibo.
    10. Mtnman-BP has to recode my car for halogen lights as high beams. (oh yeah, bp, wanna help me?) also wrench for hire for vanos/lcabs/suspension/etc
    11. rvariverguy - RTABs, computer flashing, small dent/paint repair?
    12. joelshow - rear brake pads and rotors...if I bring the parts can someone help with the install?
    13. iZHP - Sunroof shade, and a few other small fixes.

    Tools available

    1. Chad44: RTAB bushing removal/install kit
    2. DW77 - Fender Roller, 1 low profile jack, 1 regular jack, 2 jack stands, 2 Rhino ramps, and all my tools will be available. I additionally have my archaeic method for tranny and diff fluid changes (Tygon hoses and funnels). If someone wants to bring pump....that would be awesome. We will also need several jacks/jackstands, tool bags.
    3. BP - Coding capability.
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  3. #3
    Join Date
    Jun 2011
    Location
    Northborough, MA
    Posts
    304
    Updated some of my tools...

    MAINTENANCE INFO

    Name - Maint Item

    2. Whitexi - May do the cooling system again if not done before the trip, may also bring a window regulator for each door
    3. Jayjay_dee - transmission fluid change and differential fluid too.
    4. cakM3 - VANOS seals replacement and anti-rattle kit (could use some help ) / new coils-spark plugs / rolling fenders if available
    5. static667 - REVISED 3/02/12: LCABs, tie rod ends, VANOS, and maybe a sunroof fix. BP will be doing some code work in there somewhere.
    6. az3579 - Depending on what breaks between now and then
    7: chad44- maybe clutch/flywheel upgrade or coil overs... Only time will tell.
    8. yousharenow- Front LCAB's (wiill we have the tools to do this?), Fuel filter ,Micro filter, Brake Fluid Flush. Maybe a head cover gasket
    9. Zell- New rotors on all 4/sandpaper brake pads to be flat (they're already basically new, no reason to buy new brake pads), entire cooling system, and if there is time, steering guibo.
    10. Mtnman-BP has to recode my car for halogen lights as high beams. (oh yeah, bp, wanna help me?) also wrench for hire for vanos/lcabs/suspension/etc
    11. rvariverguy - RTABs, computer flashing, small dent/paint repair?
    12. joelshow - rear brake pads and rotors...if I bring the parts can someone help with the install?
    13. iZHP - Sunroof shade, and a few other small fixes.

    Tools available

    1. Chad44: RTAB bushing removal/install kit, 4 low profile jacks(w/built in stand), 2 fluids pumps(one for trans, one for diff), brake system power bleeder w/ BMW adapter.
    2. DW77 - Fender Roller, 1 low profile jack, 1 regular jack, 2 jack stands, 2 Rhino ramps, and all my tools will be available. We will also need several jacks/jackstands, tool bags.
    3. BP - Coding capability.




    Sent from Tapatalk

  4. #4
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,874
    Perfect Chad.
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  5. #5
    Join Date
    Apr 2011
    Location
    Northern Virginia
    Posts
    40
    I've got two tool bags full of stuff I've used to do anything and everything for my car I'll bring.
    2004 330i Jet Black zhp
    :AA stage 1 supercharger:-:BimmerBrake Headers:-:UUC lightweight flywheel/organic clutch:-: VMR v710:-:more to come
    Merhaba

  6. #6
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,874
    Quote Originally Posted by R0B View Post
    I've got two tool bags full of stuff I've used to do anything and everything for my car I'll bring.
    OK. Great.

    Sent from SIGFest-2012, USA on HTC via TTv2
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  7. #7
    Join Date
    Jun 2011
    Location
    Northborough, MA
    Posts
    304
    Bump! Don't forget to pack your tools everyone! Due to space confinement, I may only be able to bring 2 jacks, but I'm not planning to do any work anymore, so it should be okay.


    Sent from Tapatalk

  8. #8
    Join Date
    Jun 2011
    Location
    Northborough, MA
    Posts
    304
    DW- did I read somewhere that you have a 46mm socket for doing the front wheel bearings? If so, I may actually do those while down there.


    Sent from Tapatalk

  9. #9
    Join Date
    Jan 1970
    Location
    Lebanon, OH
    Posts
    37,874
    Quote Originally Posted by Chad44 View Post
    DW- did I read somewhere that you have a 46mm socket for doing the front wheel bearings? If so, I may actually do those while down there.


    Sent from Tapatalk
    I have the set and a large torque wrench.

    Delivered from SIGFest USA
    "Flame suit NOT REQUIRED!!!"
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs

  10. #10
    Join Date
    May 2011
    Location
    Kensington, Maryland
    Posts
    2,202
    I'm going to bring my tool bag along with my torx bits and brake bleeder. I have a jack pad adapter from ECS as well.
    2005 Jet Black 6MT ZHP "Family First"
    ~Rob~

Page 1 of 3 123 LastLast

Similar Threads

  1. Roundel magazine coverage of ZHP Mafia SIGFest 2012
    By Marcus-SanDiego in forum General Discussion
    Replies: 107
    Last Post: 03-06-2013, 07:20 AM
  2. The Official Countdown to the ZHP Mafia SIGFest 2012 thread
    By Marcus-SanDiego in forum General Discussion
    Replies: 198
    Last Post: 05-25-2012, 06:27 AM
  3. Replies: 80
    Last Post: 05-11-2012, 07:02 AM
  4. Eurocharged Performance Tuning Interest at ZHP Mafia SigFest 2012
    By Eurocharged in forum General Discussion
    Replies: 69
    Last Post: 04-08-2012, 09:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •