Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    Apr 2011
    Location
    Denver Metro
    Posts
    42

    Foglight covers?

    Cracked a foglight last fall and rather than replacing it, I decided to cover both with a couple layers of blue painters tape - at least through the winter road gravel season. ...

    Put the new one in last month and today notice that the other one cracked now and the new one has a chunk missing. Dadgummit! I don't think I've used my fogs more than a handful of times anyway, so I'm thinking of just covering them back up.

    I'd like to find a more permanent and asthetic solution to blue painters tape, but have not been able to find anything off the shelf that fits my needs. There are clear/clearish films out there, but I'd like to put an opaque covering on them. Since they are cracked, I figure I'll slather some adhesive on the lenses and put whatever I find on top of that - referably in the same blueish tone (it actually looks kind of cool. Or is it kewl? k3w7? kuhl? At any rate, I like it...).

    I've looked into some 3mm neoprene or codura. Any other ideas?

    Euro Delivery 2006.

  2. #2
    Join Date
    Jan 1970
    Location
    32.8 N, 117.3 W
    Posts
    7,640
    you say you don't use your fogs?



    $309.99 - Bimmerworld E46 Carbon Fiber Brake Ducts

  3. #3
    Join Date
    Jun 2011
    Location
    Chapel Hill, NC
    Posts
    2,292
    You can just take them out..


    Sent from my iPhone using Tapatalk
    -Chris-

    2003 ZHP Sedan - Jet Black on Sand - SOLD

  4. #4
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    If you do take them out, there is a little bracket you can cut off and have holes in it




    I really like the look.

  5. #5
    Join Date
    May 2011
    Location
    A,GA
    Posts
    994
    Lamin-X film should keep them intact.

  6. #6
    Join Date
    Apr 2011
    Location
    Denver Metro
    Posts
    42
    Quote Originally Posted by Hermes View Post
    Bimmerworld E46 Carbon Fiber Brake Ducts
    Drool...

    Euro Delivery 2006.

  7. #7
    Join Date
    May 2011
    Location
    Kansas City
    Posts
    1,328
    Quote Originally Posted by zj96sc View Post
    Lamin-X film should keep them intact.
    I agree I did lamin x and after a 3000 mile trip the lamin-x had a trial by fire and performed flawlessly


    ~Steve
    Sent from my iPhone using Tapatalk

    Mods: Smoked corners, smoked side markers, smoked tails, 35% tint, CF kidney grills, debadged, angel eyes, 3000k HID Fogs, OBX exhaust, Sharked, solo werks S1 coilovers, front and rear strut brace, AUX cable
    "I'd rather lose by a mile because I built my own car, than win by an inch because someone built it for me"

  8. #8
    Join Date
    Jan 1970
    Location
    Fayetteville, NC
    Posts
    1,783
    This is the correct Lamin-x item, right? (link below)
    I don't think there's a difference in ZHP fog lights, so these should fit well?
    Can someone who already have them confirm ? and can one easily apply them while the fogs are still on car?
    http://www.lamin-x.com/BMW-E46-99-05...ers-p/b102.htm
    2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster


  9. #9
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Quote Originally Posted by Washburn View Post
    This is the correct Lamin-x item, right? (link below)
    I don't think there's a difference in ZHP fog lights, so these should fit well?
    Can someone who already have them confirm ? and can one easily apply them while the fogs are still on car?
    http://www.lamin-x.com/BMW-E46-99-05...ers-p/b102.htm
    These are what I got.

    http://www.modbargains.com/_e/E46_Li..._Light_Kit.htm

    They have for sedan as well.

    http://www.modbargains.com/_e/E46_Li..._Light_Kit.htm

    Sent from SIGFest 2012
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  10. #10
    Join Date
    Jan 1970
    Location
    Fayetteville, NC
    Posts
    1,783
    So the M3 one fits ours, eh?
    Thanks.
    2005 AW ZHP Coupe. CW, Alcantara, Leather st. wheel, HK, Xenons, Step, Dinan chip & air box, USASpec, Sprint Booster


Page 1 of 2 12 LastLast

Similar Threads

  1. Car Covers?
    By HokieZHP in forum General -- ZHP Related
    Replies: 12
    Last Post: 10-03-2011, 11:02 AM
  2. Headlamp Covers
    By Newjack in forum Detailing
    Replies: 6
    Last Post: 05-31-2011, 04:03 PM
  3. Car covers?
    By Johnmadd in forum Detailing
    Replies: 14
    Last Post: 04-24-2011, 04:58 PM
  4. Fog lights & fog light covers
    By Tampa330i in forum Lighting
    Replies: 14
    Last Post: 01-24-2011, 02:49 PM
  5. Strut tower covers
    By MrMaico in forum General -- ZHP Related
    Replies: 29
    Last Post: 01-09-2011, 12:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •