The videos star Dan Law, from lots of interesting angles 2:
NB: You need the latest version of quicktime to watch the downloadable versions
Here is an excellent written DIY with pictures, listing all the steps clearly (thanks to mikymu)
http://www.m3forum.net/m3forum/showthread.php?t=179844
Download video in full quality here (save link target): Jacking
NOTE: Forgot to put it in the video, buy make sure you disconnect the auto leveling arm before removing the front shocks. You MUST do this or it could snap. (the auto leveling arm is the small bracket attached to the control arm on the passenger side only)
Download video in full quality here (save link target): Front Suspension Removal
Download video in full quality here (save link target): Front Strut Assembly
Download video in full quality here (save link target): Front Suspension Installation
Download video in full quality here (save link target): Trunk Liner
Download video in full quality here (save link target): Rear Suspension Removal
Download video in full quality here (save link target): Rear Suspension Installation
Note on Rear suspension install: If you are installing KWs, the rear ride height adjustor goes on TOP of the spring, not underneath like all other kits. In addition, the rubber pad that was mounted on top of the stock spring should be used underneath the KW spring (between the control arm and the spring).
Download video in full quality here (save link target): RSM Lubing
Download video in full quality here (save link target): RTABs
Download video in full quality here (save link target): FCABs
Download video in full quality here (save link target): Front Sways
Download video (both parts) in full quality here (save link target): Rear Sways
Download video in full quality here (save link target): Tie Rods
Download video in full quality here (save link target): Trunk Trimming