Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 10 of 10
  1. #1
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940

    *Request Thread* Need Pics of the Fuel Lines into the Fuel Filter

    My M54 Fuel filter came in today! I'm in need of some helpful pictures and possibly part numbers (If they are stickered onto the lines) to begin my M52tu to M54 Fuel Line/Rail conversion.

    If you have time or access, I just need a shot of the fuel lines running into the filter and the one scavenge air line that doesn't seem to be connected to anything. These lines are on the driver's side and are BLUE in color. Much love for helping
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  2. #2
    Join Date
    May 2011
    Location
    A,GA
    Posts
    994
    If i didn't have to bust that annoying plate off to get these I'd do it right now. Maybe someone's doing a filter swap in the next few days.

    At the risk of my post being totally useless, here's the TIS shots:

    http://tis.spaghetticoder.org/s/view.pl?1/06/29/00

    and the M54 in a z3:

    http://tis.spaghetticoder.org/s/view.pl?1/06/54/80

  3. #3
    Join Date
    May 2011
    Location
    Kansas City
    Posts
    1,328
    Damn man if you posted this last Friday I would have snagged some pics when did mine


    ~Steve
    Sent from my iPhone using Tapatalk

    Mods: Smoked corners, smoked side markers, smoked tails, 35% tint, CF kidney grills, debadged, angel eyes, 3000k HID Fogs, OBX exhaust, Sharked, solo werks S1 coilovers, front and rear strut brace, AUX cable
    "I'd rather lose by a mile because I built my own car, than win by an inch because someone built it for me"

  4. #4
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    Yeah I wasn't thinking. I've looked and looked for pictures, but my search strings aren't pulling any matches.

    Thanks for the help. I cross-posted on e46F too.
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  5. #5
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Anytime you guys do maintenance, snap pics. Even if you don't make a thread, or share them right away, they'll be in your phone for a long time, and can be used when needed.

    Sent from Williamsburg, VA USA
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  6. #6
    Join Date
    May 2011
    Location
    Kansas City
    Posts
    1,328
    Quote Originally Posted by danewilson77 View Post
    Anytime you guys do maintenance, snap pics. Even if you don't make a thread, or share them right away, they'll be in your phone for a long time, and can be used when needed.

    Sent from Williamsburg, VA USA
    Good idea.. Will do in the future


    ~Steve
    Sent from my iPhone using Tapatalk

    Mods: Smoked corners, smoked side markers, smoked tails, 35% tint, CF kidney grills, debadged, angel eyes, 3000k HID Fogs, OBX exhaust, Sharked, solo werks S1 coilovers, front and rear strut brace, AUX cable
    "I'd rather lose by a mile because I built my own car, than win by an inch because someone built it for me"

  7. #7
    Join Date
    Sep 2012
    Location
    Asheville, NC
    Posts
    73
    See if this video is of any help....
    http://www.youtube.com/watch?v=i7Y2Ln6EJks
    '05 330CiC w/ZHP option Semper Fi!

  8. #8
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    Okay, so I can't dive into it today lost two hours of work because I had to drive to Towson to get the F connector that provides vacuum to the regulator. Also picked up a meter of vacuum hose. Total cost $13.77. :

    Hoping that tomorrow will be the day!
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  9. #9
    Join Date
    Mar 2011
    Location
    Baltimore, MD
    Posts
    6,940
    Project completed and the car started! Pics and details later. No pics currently. Dirty ass hands...
    Porsche 944 Turbo Build

    One ride and you'll understand why most rocket scientists are German.

    My ZHP Build 2004-2014 RIP


  10. #10
    Join Date
    Feb 2011
    Location
    Valparaiso, IN
    Posts
    3,595
    Sweet! Congrats


    Sent from my iPhone using Tapatalk


Similar Threads

  1. Fuel filter...how often?
    By Washburn in forum Maintenance
    Replies: 13
    Last Post: 11-01-2012, 07:33 PM
  2. Installed new fuel filter and car won't start! Help!!
    By BurghJR in forum Mechanical | Troubleshooting
    Replies: 16
    Last Post: 02-23-2012, 11:34 AM
  3. Fuel Filter DIY Question
    By kayger12 in forum Maintenance
    Replies: 47
    Last Post: 01-11-2012, 05:56 PM
  4. Fuel pump/filter replacement?
    By Cadeez in forum Maintenance
    Replies: 15
    Last Post: 08-25-2011, 04:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •