Up for sale is my ZKW passenger (right) and driver (left) headlight assemblies . I recently took them out of my car due to the burnt bowl issue and the passenger side not lighting up at all. As of right now, the driver side light works great, the output is just low from the bowl issue.
I initially thought it was just a bad bulb. I replaced it with a Phillips DS2 bulb from TheRetroFitSource.com:
That didn't solve the problem. When I put the new bulb in, I also noticed some condensation that had built up on the inside of the lens as well as in the assembly itself. The exterior of the lens is a little pitted from normal road rash but still works fine.
So, if someone wanted to put a little money and time into this, it would make a nice project for a bowl retrofit. I honestly don't know if the ballast or the ignitors are working at all. It would probably need some new gaskets and protective caps as well to ensure it was sealed properly.
The good news is it comes with a brand new DS2 bulb installed. If you want, I can throw in the mounting bracket as well.
I'm looking for $100 plus shipping or shoot me a PM with an offer and we'll see if we can agree on a price. Thanks,
Quik
For non-members:
http://forums.bimmerforums.com/forum...6#post25739496
Shoot me a PM on Bimmerfest and tell me you saw it on ZHPMafia.com for the family price.
The Retrofit Source Inc
------------------------------------------------------
Order Number: 29037
Available Installation Guides: http://www.theretrofitsource.com/install_guides.php
Date Ordered: Tuesday November 20, 2012
Products
------------------------------------------------------
1 x D2S: Philips 85122+ (PhilipsD2S) = $95.00
------------------------------------------------------
Sub-Total: $95.00
USPS First Class Mail: $4.28
Total: $99.28
Reply With Quote