What did you do for your ZHP/ BMW / MINI today? #2

[anandoc]

Well my original ones were rubber like. The new ones were foam like. They seemed to fit in the space but I couldn't press the lenses back on because the foam seemed to be too thick. Never was able to put the new gaskets in.

You didn't run into that issue???

Yeah, I noticed the new ones to be foam like as well. There was a little bit more resistance while putting the lens back but I was able to get all the clips to go 'click'. Did you make sure to push the gasket all the way within the groove?

[alexandre]

Taking the ZHP for long spirited drive to get beer! (Cheyenne, WY and back).

Also realized in Thursday my AC doesn't work. Either I have a leak somewhere or something isn't working. Anyone else diagnose this?

Yup, I had mine serviced last summer. Freon was ~1/3 of original capacity. Ran me a $150 or so to recharge. Might be more expensive if you have a serious leak.

[ELCID86]

W.R.T. The gaskets, yes the new ones don't seem to fit quite as easily. I didn't have to cut, but did has a bit of a time getting the lenses to seat.

Installed my Mason bar today. Saving the BMWP one for now.

[rguti153]

W.R.T. The gaskets, yes the new ones don't seem to fit quite as easily. I didn't have to cut, but did has a bit of a time getting the lenses to seat.

Installed my Mason bar today. Saving the BMWP one for now.

if i didn't have the bmwp one , this was my second choise for sure

Sent from my SM-G935V using Tapatalk

[NorCalZman]

Yeah, I noticed the new ones to be foam like as well. There was a little bit more resistance while putting the lens back but I was able to get all the clips to go 'click'. Did you make sure to push the gasket all the way within the groove?

I did. I worked at if for a good while. Maybe I'll try again at some point. I might have to buy new ones. Not sure what i did with the other ones.

[san]

W.R.T. The gaskets, yes the new ones don't seem to fit quite as easily. I didn't have to cut, but did has a bit of a time getting the lenses to seat.

Installed my Mason bar today. Saving the BMWP one for now.

The bar looks good


Sent from my iPhone using Tapatalk

[Rovert]

Just cleaned the leather with Lexol leather cleaner, a toothbrush to agitate the crevasses, and a cloth to scrub the rest clean!

[Vas]

Cleaned the style 135 wheels using Nanolex wheel cleaner. Really liked the results

[D1ESEL]

Cleaned the fleet today

Untitled by Chris, on Flickr

Untitled by Chris, on Flickr

Untitled by Chris, on Flickr

Untitled by Chris, on Flickr

Then I decided to take the ZHP for a night cruise because I have been on the fence about selling it. I am defiantly going to hold onto it now and just figure out living with 3 cars and make it work

Untitled by Chris, on Flickr

Untitled by Chris, on Flickr

[BMWCurves]

Definitely keep it. It's awesome.