Did a little test fitting of the 135i rear calipers today. The M3 rotor backspacing is perfect, but the set screw is apparently in a different spot. Haven't decided what I'm going to do...
Did a little test fitting of the 135i rear calipers today. The M3 rotor backspacing is perfect, but the set screw is apparently in a different spot. Haven't decided what I'm going to do...
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Brake bleed with ate type 200 fluid
Sent from my SAMSUNG-SM-G920A using Tapatalk
His - 2004 Imola Red / Alcantara 330i | 6MT | ZHP |
Her's - 2005 Black Sapphire Metallic / Black Leather 330i | 6MT | ZHP |
Did a thorough cleaning of my interior. Used my Swiffer to dust everything down, then followed up with a microfiber and some 303. Then I removed my WeatherTech mats, vacuumed those with my Dyson V8 cordless vacuum, then used the 3 different attachments to vacuum my interior. Finally, I used a very damp microfiber towel to scrub my steering wheel, shift knob, and leather seats.
Vacuumed out the trunk as well.
YEEESSSSS!!!
It looks fantastic as-is. Do you plan on doing the black console, dash, and armrest as well?
The current scheme is exactly like the brand new F30's (except for the airbag covers). 👍
Sent from my Pixel using Tapatalk
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Good point. And on the rear axle it's arguably less important. The E60 530i rotor allegedly has the same backspacing, which conveniently my old man drives. I'll take a look at his set screw tomorrow, otherwise I'll just go for it. I can always tap in a new hole on the rotor hat. Fronts will use stock 330 rotors thanks to the new bracket
And undercarriage shots just for Peter. The existing bump stops were a bit discolored but in great condition (so I reused them). I also put a fresh coat of undercoating in both rear wells, as the factory coating was looking every bit of 12 years old.
Emma - 2005 BMW 330ci ZHP 6MT Estorilblau Individual
Sportline 8s 18x8.5F - 18x9.5R | APEX ARC-8 18x8.5 Square | aFe Intake | 135i Brembo F/R Calipers | 26mm Front/20mm Rear Sway Bars | Z4 Mirror
M3 Dead Pedal | Lexus ES300 Yellow Fog Light Retrofit | Koni Yellows/H&R Springs | Llumar CTX 40% | Coby Tri-Stitch Wheel & Boots
Awaiting Install: M3 Wing Mirrors
Great work! I too vacuumed out the interior yesterday but at a gas station since I don't have a fancy Dyson cordless like you and our condo parking garage does not have any electrical outlets to use a regular vacuum. The rear was almost completely clean because I barely ever have passengers in the rear seats. I use a leather wipe every few weeks on my steering wheel to try to keep it free of dirt/oils.
anandoc
2004 330i auto | ZPP, ZCW | Schwarz 2 (668) | schwarz (N6SW)
aFe Stage-1 Pro DRY S intake | Morimoto FX-R 3.0 retrofit | ///M3 Seats (power, heat, bolster adj.) | ///M3 Strut Brace | ///M3 SMG Steering Wheel retrofit | OEM Alarm retrofit | GROM USB | Khoalty angel eyes
I like having the dash have beige on it, so that won't change.
I plan on getting a black alcantara cover for the arm rest from Coby Wheel.
What's the "console"? The plastic thing in the middle that holds the arm rest and coin holder? Hadn't thought of that. Probably will leave that the same.
His: 05 330 ZHP Imola Red - 07 Z4 M Coupe Imola Red
Hers: 04 330i ZSP
2004 325 M56 Steel Blue Metallic - Sold
Stephen's DD & AutoX/HPDE Build Thread
Stewart WP - Z4M LCAB - M3 trans/motor mounts - DICE MediageBridge Duo - ARC-8 17x8.5"
DrVANOS - Mason Engineering Race Strut Bar - E30 Exp. Cap - Custom Black+Beige Interior - M3 Seats
Bilstein PSS10 - Turner Sway Bars 27/21 - ECST RTAB Limiters - R.E. RSM