What did you do for your ZHP/ BMW / MINI today? #2

[holyc0w]

Had a nightmare in which my red oil light came on

[Rovert]

Well my headlights decided to drop during a 300 mile night trip.



Light for the first two lane lines is not enough for 60-80mph. So I followed cars all the way home.

Found this the next day:


So I ripped it all out and disabled the power for the headlight motors and leveled it all up again...

[ZHPizza]

Had a nightmare in which my red oil light came on

2real4me

So I ripped it all out and disabled the power for the headlight motors and leveled it all up again...

Did the bracket snap? Is that a symptom of too much sideways?

And what are those sheets that you used for the aiming? I've been meaning to do mine, but don't have 50ft of level ground next a bare wall handy.

[anandoc]

And what are those sheets that you used for the aiming? I've been meaning to do mine, but don't have 50ft of level ground next a bare wall handy.

+1

Are you able to share the process and the leveling template sheet that you are using? I'd be quite interested...

[Rovert]

Did the bracket snap? Is that a symptom of too much sideways?

And what are those sheets that you used for the aiming? I've been meaning to do mine, but don't have 50ft of level ground next a bare wall handy.

Too much sideways twisted the arm right off...as you can see it's not as strong as the control arm. LOL!!!

You only need 25ft...it's not that much at all!

+1

Are you able to share the process and the leveling template sheet that you are using? I'd be quite interested...

Here are the sheets I made a while ago which I just updated from me using them lastnight...
https://www.dropbox.com/s/8i9s4s0rj3oz35i/HID%20Alignment%20DIY.pdf?dl=0

[ZHPizza]

Here are the sheets I made a while ago which I just updated from me using them lastnight...
https://www.dropbox.com/s/8i9s4s0rj3oz35i/HID%20Alignment%20DIY.pdf?dl=0

Thanks, but do you have an American version of these? Maybe something laminated and with less words?

I already spilled my Big Gulp on one and them lines is all runny...

[Rovert]

LOL that is North American. The red line is American. You can trace the lines with a crayon to make it waterproof? Or print it and bring to Staples to laminate?

[az3579]

Too much sideways twisted the arm right off...as you can see it's not as strong as the control arm. LOL!!!

You only need 25ft...it's not that much at all!






Here are the sheets I made a while ago which I just updated from me using them lastnight...
https://www.dropbox.com/s/8i9s4s0rj3oz35i/HID%20Alignment%20DIY.pdf?dl=0

Lol
It's not the sideways, it's that the components are cheap junk. Mine snapped too, and you know I don't do sideways very often!

Sent from my Pixel using Tapatalk

[anandoc]

Too much sideways twisted the arm right off...as you can see it's not as strong as the control arm. LOL!!!

You only need 25ft...it's not that much at all!






Here are the sheets I made a while ago which I just updated from me using them lastnight...
https://www.dropbox.com/s/8i9s4s0rj3oz35i/HID%20Alignment%20DIY.pdf?dl=0

This is extremely handy! Thank you!!

[melonz]

I took my car in to get the A/C recharged.

I'm hoping it's not the evaporator that has sprung a leak...