What did you do for your ZHP/ BMW / MINI today? #2

[Rovert]

now to wait for 1+ weeks for a new one to arrive.

I just checked Home Depot here in Canada and they have automotive grade drain plugs. Maybe check your local home supply store. They’re an essential business so they should be open.

[Oli77]

Cleaned my engine bay!

[johnrando]

Bummer Kendrick. Looks great Ol! That's on my list.

Sent from my SM-G988U using Tapatalk

[zhpnsnv]

It's a GS6 37BZ so I'm almost certain it's 35nm for both. I swear I set the torque wrench right but either way it's a two week wait with the car on stands and no trans fluid at least due to physical isolation in Australia I can't go anywhere anyway.

Sent from my SM-N960F using Tapatalk

I've done this too. I was sure I set it right and it wasn't even close to taking all of it. Top spun right off. Luckily I have a dealership 5 miles down the road and they had some.

Sent from my SM-G950U using Tapatalk

[KendrickC]

I've done this too. I was sure I set it right and it wasn't even close to taking all of it. Top spun right off. Luckily I have a dealership 5 miles down the road and they had some.

Sent from my SM-G950U using Tapatalk

Exactly what happened to me. Our dealerships charge 6x the price which sucks ass so I'm waiting for parts from Germany. Sad I can't get them overnighted from Japan

Sent from my SM-N960F using Tapatalk

[Whammy]

I wonder where my ZHP ended up......:/

[papa_g]

A friend came over and noticed something I had learned to ignore: my hood was not flush with the fenders, but lower. We found the little plastic screws that control hood height and adjusted accordingly. What we didn’t realize was we opened up a can of worms which led to me having to readjust my hood locks, only to realize that the hood latch support on my car is missing the plastic tabs that keep the hood latch from poking out of the grille (if any of that makes sense).
Long story short: my hood is nicely flush with the fenders and I ghetto rigged a fix for the hood latch.


Sent from my iPhone using Tapatalk

[sillieidiot]

I spent half a day making this trunk tool holder thing, instead of the studying that I was supposed to be doing





I don't have my E46 so I can't test it. But this shit always falls off my CSL trunk. Pisses me off. I figured I would work on getting the threads and basic shape done. Then when I get my car back, or visit JR, try it out then. The groove for the original piece was too small, so the fix was to just make it larger lol The other problem I have is figuring out how to print it sideways. Right now it's printed down, faster, but seems like it could break easily. Printing it sideways will require supports, but iono how TF I'm going to remove the middle portion.

edit:
I tried to print it sideways just now. Nope, can't remove the support in the middle. Ended up breaking it.

[pedro2u]

Went to the dealer and got my air bag recall completed. 90 minutes in and out, and not a sole in the place.........

[fredo]

No joke, that place is empty.