Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Results 1 to 6 of 6
  1. #1

    DUMB question regarding oil filter replacement

    I started to change my oil and extracted all the oil out, then realized I did not have ANYTHING to connect to my 32mm socket for the OFH cap as the sock had a 1/2" driver. So I simply finished draining the oil and refilled with new.

    The question is: Can I replace the oil filter with the oil still in it? I was hoping that since the OFH sits higher, that when the car is off, the oil will not still be up in the housing...

  2. #2
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Yes. You can replace it.

    I replaced my ofhg without draining oil, for reference.

    Sent from Williamsburg, VA USA
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  3. #3
    Join Date
    Aug 2011
    Location
    The Windy City
    Posts
    9,155
    Good 2 know


    - Goin' H.A.M. Mobile
    Call me Seth
    CURRENT: 2016 Long Beach Blue BMW /// M2
    RETIRED: ‘15 F22 M235i | '08 E90 M3 DCT "GoinHAM3" | '04 E46 M3 6MT "WEGOHAM"
    '04 330i ZHP | '11 E82 135i | '08 E90 328xi | 07 E91 328xi SportWagon

    Quote Originally Posted by danewilson77 View Post
    If I wore panties, I'd be dropping them right now.

  4. #4
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Quote Originally Posted by UdubBadger View Post
    Good 2 know


    - Goin' H.A.M. Mobile
    #themoreyouknow

    Sent from Williamsburg, VA USA
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  5. #5
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    #knowingishalfthebattle #GIJOE

    There will be barely any oil in the OHG when you remove that filter :D

  6. #6
    Autozone.com
    Thanks DW! I felt so dumb... I stood there in the parking lot of my apartment complex trying to figure out how I was gonna get the cap off, thinking that if I put oil in now, go to the store and get a 1/2" socket wrench, that I would have to drain the oil again. I even called my leasing office to ask if they still had a maintenance guy on the grounds to see if I could borrow a socket wrench, then I had the facepalm moment.

Similar Threads

  1. Fuel Filter DIY Question
    By kayger12 in forum Maintenance
    Replies: 47
    Last Post: 01-11-2012, 05:56 PM
  2. Fuel pump/filter replacement?
    By Cadeez in forum Maintenance
    Replies: 15
    Last Post: 08-25-2011, 04:44 PM
  3. Dumb A/C in rear coupe question?
    By tomjonesrocks in forum General -- ZHP Related
    Replies: 11
    Last Post: 08-16-2011, 05:33 PM
  4. Which air filter?
    By L0veZHP in forum Maintenance
    Replies: 19
    Last Post: 05-03-2011, 04:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •