Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 1 of 56 1231151 ... LastLast
Results 1 to 10 of 556
  1. #1
    Join Date
    Dec 2012
    Location
    Socal
    Posts
    1,642

    Tony's ZHP Project

    Hi everyone so pretty much I already started ordering parts and planning out a set of mods I will be doing to the ZHP. As for now I'll upload a before photo of the car and as time goes I'll upload more photos of the mods I will be doing. Just wait and see

    VIN WBAEV53483KM04057



    Mods already done -
    Coded LCM - removed the tamper dot when I first purchased the car
    AFE Intake - removed for BMW performance intake
    Smoke Rear Corners - removed for OEM clears
    Relocation Kit added (still pondering what to do instead; returned enco unit)
    Retrofitted Lumbar Support into Front Seats
    Valve Cover Replacement + VCG + Vanos Seals + Vanos Gasket
    Clean ICV + DISA + TB + Intake Check Up
    Replace ICC with Cold Weather ICC
    F10 M5 Knob with Alcantara Shift Knob
    Repair Silver Cube Trim
    <strike>GOMINIGO 'NO HOLES' LPB Kit 01/22/2013</strike>
    CCV, oil filter housing gasket, vcg, spark plugs, vanos swap, intake boots changed, icv grommet and vanos line 02/11/2013
    LED License Plate + Lens
    <strike>Aspherical Blind Spot Mirror 04/18/2013</strike>
    M5 Fog Lights from ebay 05/08/2013
    Clear lens all around 05/14/2013
    M3 Switch Panel with TPMS wired to DSC 05/28/2013
    PA Soft Speedo and Temperature Correction 03/02/2014
    USMillworks Front Bracket with Quick Disconnect 03/02/2014
    BMW Performance Strut Bar 03/17/2014
    Corsa TSE3 exhaust 10/22/14
    Carbon fiber emblems
    Armrest delete center console and euro tray

    To be added
    BC Coilovers
    SSK not sure what kind or just fix the oem one
    Pulleys
    Shark Injectors
    Sprint booster with mod
    Complete audio system overhaul
    Cobywheel Rewrap
    Refinish rims (135s, Beyern Mesh, 68s)
    New front bumper and splitters + complete paint job
    Hidden V1 in mirror plus update the V1
    Fix driver side bolster and install side bolsters
    M3 brake kit upgrade
    Umnitza halo kit
    LSD 3.46/3.37 ratio
    Supercharger (not in the near future)
    One side cup holder driver side

    Maintenance -
    112xxx CCV, oil filter housing gasket, vcg, spark plugs, vanos swap, intake boots changed, icv grommet and vanos line 02/11/2013
    113140 Sway bar bushing - 04/04/2013
    113490 oil change, replace oil drain plug - 04/25/2013
    Fuel Filter 05/19/2013
    Fuel Pump 05/19/2013
    Rear Cushion Thanks to Joop 05/18/2013
    Headlight housings 05/18/2013
    Painted rear diffuser 06/02/2013
    121865 Rear tires (hankook ventus v12 and bereyn mesh rims) 9/26/2013 -Thanks CHARLIE for the RIMS!
    124500 Front tie rods 11/9/2013
    124530 Transmission Fluid, Differential Fluid and BMW Performance Short Shifter 11/10/2013
    133180 Guibo and oil change 4/20/14
    ///M Front End (Control arms, tie rods, spindles, brakes) 5/6/14
    Added M3 Track mode
    Added OEM Tirepressure RDKS RDC
    Replacement aftermarket aspherical mirrors
    5/7/14
    New windshield and AL headlights 5/19/14
    139848 LCM 4.5 10/2/14
    139853 M3 Mirrors fixed and installed 10/4/14
    141265 Corsa TSE3 Exhaust 10/22/14
    14XXXX Rear Sun Shade 12/22/14
    Reinforcement Plates M3 Rear End 5/31/15
    Replace Lower control arms turner 6/22/15
    152000 Oil Change7/13/15
    186500 Clutch replacement
    187000 BC Coils and Brake Pads/Rotors 11/14/18
    188000 Installed Eonon GA9150KW 11/26/18
    192500 Oil Change with liquid moly 5W-40 from FCP Euro 192500 5/1/2019
    192500 Changed Pre-Cat oxygen sensors 5/1/2019
    207800 Spark plugs NGK 3199 BKR6EQUP 5/18/2020
    Miles 212749 9/19/22
    Oil Change
    Upper Coolant Hose
    Lower Coolant Hose
    Thermostat
    Water Pump
    Expansion Tank
    Radiator Drain Plug

    Name:  IMG_1019.JPG
Views: 5679
Size:  3.00 MB
    First got the car back and registered.


    Most recent photo



    M3 front end

    Last edited by Tnhl1989; 03-21-2024 at 01:38 PM.






    Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens


  2. #2
    Join Date
    Aug 2011
    Location
    San Diego, CA
    Posts
    2,785
    Silver gray is taking over! Looking forward to the mods.

  3. #3
    Join Date
    Sep 2011
    Location
    San Francisco, CA
    Posts
    6,847
    awesome! can't wait to see whats in store for this car. :D

  4. #4
    Join Date
    Sep 2011
    Location
    SEPA
    Posts
    42
    Hope you have seat warmers, looks a little chilly there.
    -RBY

  5. #5
    Join Date
    Jan 1970
    Location
    Lexington, KY
    Posts
    4,903
    Teaser thread! I already think the car is gorgeous as is.
    325i, 2005, 5MT, Silvergrey, leatherette, Sport package; CDV delete, KONI STR-T & KYB Excel-G, Weisslichts, Stewart H2O pump

    328i, 2010, 6MT, Spacegrey, dakota leather, M-sport packages; has a 330 intake but no tune - yet
    http://s900.photobucket.com/user/othibau/media/Junesig.jpg.html][IMG]http://i900.photobucket.com/albums/ac208/othibau/Junesig.jpg

  6. #6
    Join Date
    Dec 2012
    Location
    Socal
    Posts
    1,642
    Teaser currently. I will have some photos and stuff up once I get a chance to stop tearing apart the old 330xi.

    @Rby - There are seat warmers. That was one of the options I must have. I didn't want to attempt that retrofit. However lumbar support didn't seem too hard though.

  7. #7
    Join Date
    Jan 1970
    Location
    Liberty Township, OH
    Posts
    37,935
    Good to see this get rolling.
    Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim

  8. #8
    Tony,

    Get the front license plate delete strip and gominigo tow hook license plate mount. It will look so much better! Can't wait to see your car in person

  9. #9
    Join Date
    Dec 2012
    Location
    Socal
    Posts
    1,642
    Already ahead of you on that mod Charlie. I forgot to add that to the list. I'm waiting for the mount to come in now.






    Tony's ZHP "Wulf" '03 Silver Gray | Valentine 1 Radar Detector| Alcantara | BMW Performance Intake | F10 M5 Knob | Auto-dim Retrofit | BMW Alarm | Performance Grilles | OEM Roof Rack | Rain Light Sensor Retrofit | Eonon D5150 Head Unit | BMW OEM Clear Lens


  10. #10

Page 1 of 56 1231151 ... LastLast

Similar Threads

  1. Charrie's ZHP project
    By cakM3 in forum Projects
    Replies: 3480
    Last Post: 09-22-2018, 10:39 AM
  2. Project M3TA5IN
    By M3TA5IN in forum Projects
    Replies: 92
    Last Post: 09-02-2014, 08:38 AM
  3. Project METASIN
    By M3TA5IN in forum Projects
    Replies: 82
    Last Post: 04-01-2014, 10:38 PM
  4. My ZHP project:
    By INDY|UND3RGROUND in forum Projects
    Replies: 18
    Last Post: 08-17-2011, 06:11 AM
  5. Project Forum
    By mimalmo in forum Suggestions & Ideas
    Replies: 17
    Last Post: 02-22-2011, 04:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •