Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
sorry guys I haven't been getting these updates till now.
to keep the engine cleaning basic we follow the Adam's Video on Engine Cleaning
There are products to disinfect and neutralize the order in the car, you can use the 1Z einszett Klima Cleaner ETU
I started using the m101 and it does cut faster and I feel its worth the increase in price.
microfiber pads I love them they do a great job cutting.
Meg's D300, Meg's M105, Meg's M101, Menzerna FG400 as well as Sonax Fine Abrasive Polish all work well with the MF Cutting Pads.
The Surbuf will give you some really nice cut, did you need that much cut?
I'm wanting to do a cut and polish on my car as its not been done since I bought the car. I currently do not own an orbital or anything of that nature so am in the market for some kind of "starter kit" that comes with everything I would need.
Also with my car being a lighter color (Titanium silver) would I really see that much of a difference regarding appearance if i were to cut and polish it?
Do I need to worry about buying a thickness reader (not sure the proper term for it) before I attempt to cut and polish to keep from going past the clear?
'01 330i
you won't need to worry about the measuring of the paint with an orbital polisher.
here are a few kits to look at
Griot's Swirl Remover Kit
Griot's Meg's DA System
what you want to do is
wash
clay
compound (if needed)
polish
wax or seal.
Phil