Materials to Maintain Your ZHP IIIII Hand Protection IIIII Tools to Maintain Your ZHP
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Join Date
    Apr 2011
    Location
    Montréal
    Posts
    26
    Newjack Thanks for the input! If it was misfire, shouldn’t I get a code? Ill check the lower intake boot and clean the idle control valve ASAP! Thanks!

    echo46 I was thinking exactly the same about the cam position sensor… A buddy had an issue with that part and the symptoms were pretty close the same!

    Johnmadd About the alternator voltage regulator, the other day, when I started the car, the whining sound was pretty bad and I noticed that when the indoor light were on, they were fluctuating big time with the whining sound!

    Clearly there was a link with the whining sound and the alternator somewhat!


    So alexandre is gonna come check the car next WE. Never thought I’d say that but I hope the symptoms will still be present!

    Thanks again all!!

  2. #12
    Join Date
    Jul 2011
    Location
    Long island, New York
    Posts
    1,493
    Let us know what happens, I curious.

  3. #13
    Join Date
    Apr 2011
    Location
    Dallas
    Posts
    822
    Worth a look?

    Quote Originally Posted by aurelius View Post
    Click HERE for an E46f thread that gets straight to the point re the lower oil drain hose connecting the CCV to the dipstick tube. Bottom line is it fails regularly, causes a rough idle (especially in cold weather), may save you from full CCV rehab, and is cheap/easy. Note: in addition to the part number mentioned in the DIY, there's another, insulated version of that hose. Same price as non-insulated.

    Amazing how many respondents to that thread have found this hose to have disintegrated.

  4. #14
    Join Date
    Apr 2011
    Location
    Montréal
    Posts
    26
    Thanks for that! Ill take a look!
    Quote Originally Posted by aurelius View Post
    Worth a look?
    Sure!
    Quote Originally Posted by echo46 View Post
    Let us know what happens, I curious.
    The past few days have been more clement (-10) and its starting ok now. No whining sound anymore...

    Aux Input -/- Burger spacers -/- Tri-Stitch Coby Wheel -/- M3 Projector Retrofit -/- VANOS rebuild -/- CVV replacement

  5. #15
    Join Date
    Apr 2011
    Location
    Dallas
    Posts
    822
    Did you ever solve this issue? If so, do tell.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Rough idle/stall on cold start
    By dyintorace in forum Mechanical | Troubleshooting
    Replies: 51
    Last Post: 12-04-2014, 04:34 PM
  2. Rough idle solely at start up?
    By BustedBoat in forum Mechanical | Troubleshooting
    Replies: 26
    Last Post: 06-01-2014, 08:03 PM
  3. Rough Idle at Start Up, Stop Lights, etc
    By VaTechZHP in forum Maintenance
    Replies: 49
    Last Post: 05-03-2012, 01:19 PM
  4. EXTREME rough idle at R and D gear, but ok in P & N.
    By mikeyb74 in forum Mechanical | Troubleshooting
    Replies: 13
    Last Post: 10-19-2011, 06:53 AM
  5. rough idle, dying after start (on RARE occasion)
    By T.Bird in forum Mechanical | Troubleshooting
    Replies: 13
    Last Post: 08-15-2011, 06:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •