For the ZHP- what ya got?
For the ZHP- what ya got?
Last edited by ejp2fast; 03-12-2013 at 05:17 AM.
2003 ///ZHP Sedan -Silver Grau - Alcantara - 6MT - 3.46 diff - Style 197's
There are a few threads around on this, more options for the sedan, but I like (for coupe) Umnitza. Several others recommend WeissLicht.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Could you be more specific on the more options for Sedans? I just happen to have one, and would like some Angel Eyes in the future as well.
Sorry, I don't know as I have a vert/coupe. Never researched sedan AE's.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture
Dude, have you got options.
Umnitza has plenty with great reviews.
Khoalty has a set, I saw them on Sean's (Pip) ZHP, and they look great.
Weisslicht is very good as well, and are the ones I would go with. From what I hear, they are thinner and just look classier, but I can't verify.
You can get cheap ones off eBay, but the LEDs are pretty big and far apart so they look like shit close up.
There are others, but I can't recall at the moment. The ones I have listed should have what you need, however.
I've had the Weisslichts since July 2009.
Williamsburg, VA, Droid DNA, Tapatalk
Call Me Dane l 2/2004 330i ZHP l 18x8 ET45 BBS CK's wrapped with Michelin Pilot Sport AS3+ @ 245-40-18 l KW V1 Coilovers in front l KW V1 springs w/ Bilstein B8 dampeners in rear l BMW Performance Rotors l UUC StrutBarbarian l Racing Dynamics Rear Strut Bar l Jim Conforti Shark Injector l Light Birch Interior Trim l Bimmian Celly Mount l M3 Trunk Mat l l e90 Performance E-Brake & Shift Knob l M3 Tri-Stitched Boots l AL Headlight Retrofit with ZKW Lenses l CobyWheel Wrap w/M3 Stitching l LCM sw 4.5 triple blink and rear fogs l Maple Interior Trim
These are from Umnitza. Size 11X. They are a gift from my son.
There are relatively clear install instructions available, but I think the best are from another source other than Umnitza.
You're gonna read about baking your headlights; no baking needed for sedans.
Sedans and coupes take different sizes.
I have not installed yet because I'm trying to decide to refinish my lenses or buy new ones. I think I'd be more satisfied with new ones. Then I'd have to figure out where to get them, ha. A procrastinator's love....
For the guys who have AE's - how do you have them wired? separate switched or when the lights come on, or when fogs come on?
I have xenon's from a 325i and asked the seller if that was off of a coupe or sedan for the baking vs snap on......waiting on response.
2003 ///ZHP Sedan -Silver Grau - Alcantara - 6MT - 3.46 diff - Style 197's
No baking required, no matter the model. Sedan = no baking.
Angel eyes feed off the ECU and/or the glove box, so wiring is again the same for everyone!
Alex – '16 Melbourne Red 328d Touring
M Sport + M Performance Package
Gone, but not forgotten: '03 Imola Red 330i ZHP - 6MT
Actually Alexandre, just to be clear: there is no way to get the lens covers off the coupes/verts w/o baking the lights to loosen the glue (we're talking facelift cars, I don't know about pre-facelift). So yes, baking is required on some models. The lens covers on sedans snap on/off so they don't need baking. I'm not sure if you meant all SEDAN models or ALL models.
Randeaux/Rando/John/jr - '06 Cic ZHP; Southern California
"ZHP or not, I still like you"
ZHP Performance Package, Cold Weather Package, Leather, Jet Black/Black/BlackCube, NAV, Anthracite Black "my individual" interior trim
ESS Stage 1 Twin Screw Supercharger, Sprint Booster, BMW Perf Intake, Magnaflow Exhaust, Dinan TB & STEP S/W, UCC Sway Bars, Apex EC-7 18x8.5 ET38
Suspension: AST 44100 dampers, Bimmerworld front adjustable end links, Swift springs (8K front, 10K rear), Vorshlag camber plates
Dynavin D99+, Hardwire V1 (w/V1 Connection), BSW Stage 1 Speakers, Kicker Amp/Subwoofer
BMW Performance Strut Brace, Orion V2 Angel Eyes, No-holes License Plate, SMG Paddle Shift Mod, Besian VANOS, Gold DISA, Fan Delete, M3 Side Mirrors
Note: Actual car no longer resembles signature picture