When cycling through the gears, is it necessary to go through all gears? I mean, shift into manual mode and hit 1st, 2nd 3rd 4th and 5th?
When cycling through the gears, is it necessary to go through all gears? I mean, shift into manual mode and hit 1st, 2nd 3rd 4th and 5th?
I don't think so but I did. Probably really only really need to do P-R-N-D-SD. Might as well do the 1-3 manual gears just in case.
Edit: You can only get up to 3rd get when sitting still in manual mode.
No it will not let you start off in 3rd gear.
BAV Stage 1 - BlueBus - UltraGauge - V1 - Orion V4's - ARC-8's - Brembo 996
TTFS Engine/SMG Tune/CSL 255 - SGT Headers/Sect 1/SCZA - Evolve Eventuri
VIS XTS CF Hood - CF Lip/Console/Diffuser - OE CSL Trunk - BWS 500S 9k/11k
OP, how did you remove the fill plug? What tools did you used? I got the under the car today to scope things out before doing this job. The fill plug is in a really tight space. I can't even get the torx socket to fit, let alone with a ratchet. Any tips?
Thanks. Didn't think of that. Will go to Lowes or HD to see if they have it.